today we’re taking a look at a motorized sit-stand desk…Flexispot Transmission Rod Stuck… you may have seen my review on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are a lot of things to enjoy about the Flexispot E7. In general, my experience was extremely positive.
It’s extremely easy to assemble, and it took my 11-year-old child and I (I mostly simply supervised) under an hour from start to finish.
It’s extremely durable and can hold a lot of weight. Check out the video below of it operating while there’s an individual lying down on it if you do not think me.
The electric raise/lower function is not just easy to use and quick, however it’s also remarkably smooth and quiet.
You can configure your favored standing and sitting heights, and it will remember them, making it easy to switch in between the two without offering it much thought.
On top of being practical, it also looks great in my workplace (I got the bamboo top desk).
The width is also adjustable so it can fit in smaller areas.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might want to add a screen stand to your workstation).
The cable tray keeps all of those charging cords organized, which is also practical if your furry colleague likes to chew on or play with your cables.
Flexispot has options that are much more affordable than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a few functions that I wasn’t necessarily a substantial fan of:
The bundle that the desk came in was heavy, so bringing it inside was a group effort, but this is simply a consequence of how tough the Flexispot is.
The hassle-free cable television tray was a little bit confusing to set up. In the end, you eventually slip it under screws, which wasn’t extremely clear from the instructions.
You will need to purchase an anti-fatigue mat to stay comfy, however this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both fired up (given that this meant it was going to be strong) and also a little hesitant (because we all understand how much of an obstacle putting together furniture can be).
Thankfully, with the help of an educational YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t discussed well in the directions.
Is it worth getting a standing desk?
Once assembled, I like the sleek look of this desk. I’m confident any of the many diverse surfaces that it comes in would look excellent in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it easy, effective, and peaceful to switch between sitting and standing as sometimes as you desire throughout the day.
This desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a substantial desktop computer (or wish to take a nap on it for some reason) it has you covered. It will also uniformly distribute weight no matter how unbalanced the weight you place on it is, it won’t wiggle or wobble.
because video is pretty kitted out as the desk we’re looking at today is quite standard I attempted to get as close to that as I might on uplifts site with equivalent configurations the flexi spot desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift model is actually five inches longer however you can do a lot with 5 inches boom yes now for openness flexi area did send this desk out for evaluation however as you ought to understand by now doesn’t affect my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping up until the end of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can potentially get lacking even any cable grommets for go through the outside container
for the desktop was not harmed in any way which is utterly bizarre since I might shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply super rough man if I had actually purchased this I ‘d have been on the phone with customer care right away they did likewise handled to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without accidentally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually quite simple the entire thing came together in about 45 minutes and despite the fact that there’s cables running to it from each component to support motorized function unusually definitely where any type of cable television management materials whatsoever the frame on this system is a single motor double phase style versus the double motor three-stage design that comes requirement with the uplift desk this can be updated also to both the dual stage double motor and a three-stage double motor which presses the expense of the desk up
an extra 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from just under 28 inches to simply over forty seven point six inches so a max I ‘d it is more than tall sufficient even for me and I stay at 6 foot for this model does come standard with the control board that enables up-and-down movement plus 3 memory areas with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which has to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is very peaceful as in barely audible this outside a price would be the one advantage I would give this unit over the uplift desk and I wish to be careful here since this isn’t a hit piece this desk is 240 dollars less expensive than the equivalent uplift design over 35% less expensive even if you upgrade this flexi spot test to the double motor three-stage style it still is available in a hundred and seventy dollars cheaper than the uplift but more affordable does not mean cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll absolutely offer it that however the lateral stability of this desk the horizontal movement at this price point it’s unacceptable it’s add insult to injury here they include a little security baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft hits this baffle and the sound is definitely frustrating to top things off I chose to add rolling casters to this desk this was a $30 upgrade and two of those four casters arrived harmed also my prepare for this desk at this point is to lose the desk top and included all together and change it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches wide and 31 and a half inches deep so this will roll around the studio make it much easier to movie products without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is a financial investment in quality workplace furnishings that will last you this at finest seems like a cheaper replica of that it just doesn’t feel quality and the difference between this desk and my primary desk is night and day do feel free to take a look at their website also which also feels strangely similar to one of their competitors there’s a wealth of devices you can get for the flexi spot desk approximately and consisting of a foot massager and even a stationary exercise bike and I might spend another 10 minutes of our valuable time covering different options and devices I could however I believe I’m happier that they only sent a standard desk because as a fundamental desk I’m not a fan of the quality control at this price point and I do not think slapping on a lot of bonus is the relocation when the core product isn’t what it ought to be they do use a 30-day trial if you’re just morbidly curious and they warranty their desks for three years really desk is 5 years and uplift desk is 7 years if you are Flexispot Transmission Rod Stuck
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in terms of video gaming and performance but I would invest the extra money it’s gon na require to enter into a higher end manufacturer like uplift desk or extremely desk and I have not personally used extremely desk products so I can’t speak on it however their credibility is very good big thanks to flexi spot for sending this out for evaluation regrettably I can not suggest this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had an issue with viewing as how both the desktop and the casters got here harmed but from a consumer standpoint you ‘d probably be really excited to get this in