today we’re having a look at a motorized sit-stand desk…Flexispot V 9 Tischfahrrad Ergometer… you might have seen my evaluation on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are a lot of things to love about the Flexispot E7. In general, my experience was really favorable.
It’s really easy to put together, and it took my 11-year-old daughter and I (I primarily just monitored) under an hour from start to finish.
It’s very strong and can hold a lot of weight. Inspect out the video below of it running while there’s a person lying down on it if you don’t think me.
The electric raise/lower function is not just easy to use and quickly, however it’s also surprisingly smooth and peaceful.
You can set your preferred standing and sitting heights, and it will remember them, making it simple to change between the two without providing it much idea.
On top of being functional, it also looks great in my workplace (I got the bamboo leading desk).
The width is likewise adjustable so it can suit smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might want to add a screen stand to your workstation).
The cable tray keeps all of those charging cords organized, which is also helpful if your furry colleague likes to chew on or have fun with your cables.
Flexispot has alternatives that are even more budget friendly than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of features that I wasn’t necessarily a substantial fan of:
The plan that the desk was available in was heavy, so bringing it inside was a group effort, however this is simply a repercussion of how sturdy the Flexispot is.
The practical cable tray was a bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t really clear from the instructions.
You will require to buy an anti-fatigue mat to stay comfy, but this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both ecstatic (because this indicated it was going to be tough) and also a little reluctant (since all of us know just how much of an obstacle putting together furnishings can be).
Luckily, with the help of a training YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I discovered wasn’t explained well in the directions.
Is it worth getting a standing desk?
Once put together, I like the smooth look of this desk. I’m positive any of the many varied surfaces that it can be found in would look great in any office, and the adjustable width makes it easy to fit it in even the smallest of home offices.
The peaceful operation and height memory settings make it simple, efficient, and peaceful to change in between sitting and standing as often times as you desire throughout the day.
Finally, this desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a hefty home computer (or want to sleep on it for some reason) it has you covered. It will also evenly distribute weight no matter how unbalanced the weight you put on it is, it won’t wobble or wiggle.
in that video is pretty kitted out as the desk we’re looking at today is quite standard I tried to get as close to that as I could on uplifts website with similar setups the flexi area desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift model is in fact 5 inches longer but you can do a lot with five inches boom yes now for openness flexi spot did send this desk out for evaluation but as you need to know by now doesn’t impact my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping up until completion of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can perhaps get doing not have even any cable grommets for travel through the outdoors carton
for the desktop was not damaged in any way which is absolutely strange due to the fact that I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just extremely rough male if I had acquired this I ‘d have been on the phone with client service immediately they did also handled to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of needing to do that myself without accidentally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact quite uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each element to support motorized function unusually definitely where any sort of cable management products whatsoever the frame on this unit is a single motor dual stage style versus the dual motor three-stage style that comes standard with the uplift desk this can be upgraded also to both the double stage double motor and a three-stage dual motor which presses the expense of the desk up
an extra 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from simply under 28 inches to just over forty seven point 6 inches so a max I ‘d it is more than tall sufficient even for me and I stay at 6 foot for this model does come basic with the control panel that enables up-and-down motion plus three memory areas with an LED readout to inform you the desk height the single motor design uses this drive shaft assembly which has to be changed as the width of the desk is adjusted the motor operation itself while it might be slow is really peaceful as in barely audible this outside a cost would be the one advantage I would provide this system over the uplift desk and I want to beware here because this isn’t a hit piece this desk is 240 dollars cheaper than the equivalent uplift model over 35% cheaper even if you upgrade this flexi area test to the double motor three-stage style it still comes in a hundred and seventy dollars more affordable than the uplift but cheaper does not suggest inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll absolutely give it that however the lateral stability of this desk the horizontal motion at this price point it’s unacceptable it’s add insult to injury here they include a little security baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft hits the sound and this baffle is absolutely frustrating to leading things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters got here harmed also my plan for this desk at this point is to lose the desk top and included completely and replace it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to film items without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality workplace furnishings that will last you this at finest seems like a less expensive replica of that it just does not feel quality and the difference between this desk and my main desk is night and day do do not hesitate to take a look at their site also which likewise feels strangely comparable to among their rivals there’s a wealth of devices you can get for the flexi area desk up to and including a foot massager and even a fixed exercise bike and I could spend another 10 minutes of our precious time covering numerous choices and devices I could but I think I’m better that they only sent out a basic desk due to the fact that as a standard desk I’m not a fan of the quality assurance at this rate point and I do not think slapping on a lot of extras is the relocation when the core item isn’t what it need to be they do use a 30-day trial if you’re just morbidly curious and they guarantee their desks for 3 years very desk is five years and uplift desk is seven years if you are Flexispot V 9 Tischfahrrad Ergometer
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in terms of video gaming and productivity however I would spend the money it’s gon na require to get into a higher end maker like uplift desk or really desk and I haven’t personally used really desk items so I can’t speak on it however their reputation is excellent big thanks to flexi area for sending this out for review regrettably I can not advise this unit and for the record I’m a hundred percent sure they would have gladly changed the parts that I had an issue with seeing as how both the desktop and the casters showed up harmed but from a client viewpoint you ‘d probably be truly delighted to get this in