today we’re having a look at a motorized sit-stand desk…Flexispot V9U Review… you may have seen my evaluation on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are lots of things to love about the Flexispot E7. In general, my experience was extremely favorable.
It’s extremely easy to assemble, and it took my 11-year-old child and I (I mainly simply supervised) under an hour from start to finish.
It’s super durable and can hold a great deal of weight. If you don’t believe me, take a look at the video listed below of it operating while there’s an individual resting on it.
The electrical raise/lower function is not just easy to use and quick, but it’s also remarkably smooth and quiet.
You can configure your preferred standing and sitting heights, and it will remember them, making it simple to switch in between the two without providing it much idea.
On top of being functional, it likewise looks terrific in my workplace (I got the bamboo top desk).
The width is also adjustable so it can suit smaller areas.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a monitor stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is also helpful if your furry colleague likes to chew on or play with your cable televisions.
Flexispot has options that are much more budget friendly than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of functions that I wasn’t necessarily a huge fan of:
The bundle that the desk came in was heavy, so bringing it inside was a group effort, but this is just a consequence of how tough the Flexispot is.
The convenient cable television tray was a bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t very clear from the instructions.
You will require to purchase an anti-fatigue mat to stay comfy, but this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both fired up (given that this implied it was going to be tough) and likewise a little hesitant (because we all understand how much of a difficulty assembling furniture can be).
The good news is, with the help of an educational YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only problem I have with assembly was the cable tray, which I discovered wasn’t described well in the guidelines.
Is it worth getting a standing desk?
As soon as put together, I love the smooth look of this desk. I’m confident any of the many varied surfaces that it is available in would look great in any workplace, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it easy, effective, and peaceful to change in between sitting and standing as lot of times as you desire throughout the day.
This desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a substantial desktop computer (or wish to sleep on it for some reason) it has you covered. It will likewise equally disperse weight no matter how unbalanced the weight you place on it is, it will not wiggle or wobble.
in that video is pretty kitted out as the desk we’re taking a look at today is pretty fundamental I tried to get as near to that as I could on uplifts website with comparable setups the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift model is in fact 5 inches longer but you can do a lot with five inches boom yes now for openness flexi area did send this desk out for evaluation however as you should understand by now does not affect my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering till completion of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can potentially get lacking even any cable grommets for go through the outdoors container
for the desktop was not harmed in any way which is absolutely strange because I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just incredibly rough man if I had actually purchased this I ‘d have been on the phone with client service right away they did also managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a lot of needing to do that myself without accidentally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really quite simple the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each element to support motorized function oddly definitely where any type of cable television management products whatsoever the frame on this system is a single motor dual stage style versus the double motor three-stage style that comes requirement with the uplift desk this can be updated too to both the double stage double motor and a three-stage double motor which pushes the cost of the desk up
an additional 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than high adequate even for me and I remain at 6 foot for this design does come standard with the control board that permits up-and-down movement plus 3 memory spots with an LED readout to inform you the desk height the single motor style utilizes this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is very quiet as in barely audible this outside a price would be the one advantage I would offer this unit over the uplift desk and I want to be careful here since this isn’t a hit piece this desk is 240 dollars less expensive than the similar uplift design over 35% cheaper even if you upgrade this flexi spot test to the dual motor three-stage style it still can be found in a hundred and seventy dollars less expensive than the uplift however cheaper does not suggest cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll absolutely provide it that however the lateral stability of this desk the horizontal movement at this rate point it’s inappropriate it’s rub salt in the wound here they include a little safety baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft hits this baffle and the sound is absolutely frustrating to leading things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those four casters showed up damaged too my plan for this desk at this point is to lose the desk top and came with completely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops approximately 63 inches broad and 31 and a half inches deep so this will roll around the studio make it simpler to movie products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is a financial investment in quality workplace furniture that will last you this at best feels like a less expensive imitation of that it simply does not feel quality and the distinction between this desk and my primary desk is night and day do do not hesitate to take a look at their website as well which also feels eerily comparable to among their rivals there’s a wealth of accessories you can get for the flexi area desk approximately and consisting of a foot massager and even a stationary exercise bike and I might invest another 10 minutes of our precious time covering various options and accessories I might but I believe I’m better that they just sent a basic desk since as a basic desk I’m not a fan of the quality control at this price point and I do not think slapping on a lot of additionals is the move when the core product isn’t what it need to be they do offer a 30-day trial if you’re simply morbidly curious and they guarantee their desks for three years very desk is five years and uplift desk is 7 years if you are Flexispot V9U Review
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of gaming and efficiency but I would spend the extra money it’s gon na take to get into a higher end maker like uplift desk or very desk and I haven’t personally used extremely desk products so I can’t speak on it but their track record is excellent huge thanks to flexi spot for sending this out for evaluation sadly I can not recommend this system and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a concern with viewing as how both the desktop and the casters arrived harmed however from a consumer standpoint you ‘d probably be really delighted to get this in