today we’re taking a look at a motorized sit-stand desk…Flexispot Value Electric Height Adjustable Desk Ec1S+R4830N… you may have seen my review on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are lots of things to enjoy about the Flexispot E7. In general, my experience was extremely positive.
It’s really easy to assemble, and it took my 11-year-old daughter and I (I mainly simply supervised) under an hour from start to finish.
It’s very tough and can hold a great deal of weight. Check out the video listed below of it operating while there’s a person lying down on it if you do not think me.
The electrical raise/lower feature is not only easy to use and quick, however it’s likewise surprisingly smooth and quiet.
You can set your preferred standing and sitting heights, and it will remember them, making it easy to switch between the two without giving it much thought.
On top of being practical, it also looks fantastic in my office (I got the bamboo leading desk).
The width is also adjustable so it can suit smaller areas.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may want to include a display stand to your workstation).
The cable television tray keeps all of those charging cables arranged, which is also valuable if your furry coworker likes to chew on or have fun with your cables.
Flexispot has alternatives that are much more affordable than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a couple of features that I wasn’t necessarily a big fan of:
The package that the desk came in was heavy, so bringing it inside was a group effort, but this is just a consequence of how durable the Flexispot is.
The hassle-free cable tray was a bit confusing to set up. In the end, you ultimately slip it under screws, which wasn’t very clear from the instructions.
You will require to purchase an anti-fatigue mat to remain comfortable, however this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both thrilled (given that this implied it was going to be sturdy) and also a little hesitant (because we all know just how much of a challenge putting together furniture can be).
The good news is, with the help of an instructional YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I discovered wasn’t described well in the guidelines.
Is it worth getting a standing desk?
As soon as put together, I love the streamlined look of this desk. I’m positive any of the many diverse surfaces that it can be found in would look excellent in any office, and the adjustable width makes it easy to fit it in even the smallest of office.
The peaceful operation and height memory settings make it simple, efficient, and quiet to switch between sitting and standing as many times as you desire throughout the day.
This desk is strong. It can hold up to 335 pounds even while in operation, so if you have a large desktop (or want to rest on it for some reason) it has you covered. It will also equally distribute weight no matter how out of balance the weight you place on it is, it won’t wiggle or wobble.
because video is quite kitted out as the desk we’re looking at today is quite standard I tried to get as near that as I could on uplifts website with similar configurations the flexi spot desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift design is in fact five inches longer however you can do a lot with 5 inches boom yes now for openness flexi spot did send this desk out for review but as you must understand by now does not affect my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping until the end of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can perhaps get lacking even any cable grommets for pass through the outside carton
for the desktop was not damaged in any way which is utterly bizarre because I could shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply super rough guy if I had actually acquired this I ‘d have been on the phone with customer support instantly they did likewise handled to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of needing to do that myself without mistakenly drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact quite simple the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each component to support motorized function oddly absolutely where any type of cable television management products whatsoever the frame on this system is a single motor dual phase style versus the dual motor three-stage design that comes requirement with the uplift desk this can be upgraded as well to both the dual phase double motor and a three-stage dual motor which presses the cost of the desk up
an additional 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to just over forty seven point six inches so a max I ‘d it is more than high adequate even for me and I stay at 6 foot for this design does come basic with the control board that permits up-and-down movement plus three memory spots with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which has to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is very peaceful as in barely audible this outside a rate would be the one advantage I would offer this system over the uplift desk and I wish to beware here because this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift model over 35% cheaper even if you upgrade this flexi area test to the dual motor three-stage style it still is available in a hundred and seventy dollars less expensive than the uplift but cheaper does not indicate low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll definitely provide it that however the lateral stability of this desk the horizontal movement at this rate point it’s undesirable it’s rub salt in the wound here they consist of a little security baffle this little steel piece that mounts to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft strikes this baffle and the noise is definitely frustrating to top things off I chose to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters arrived harmed too my prepare for this desk at this moment is to lose the desk top and included all together and change it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it simpler to movie products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality office furnishings that will last you this at finest seems like a less expensive replica of that it just doesn’t feel quality and the distinction in between this desk and my primary desk is night and day do do not hesitate to take a look at their site too which also feels strangely similar to among their rivals there’s a wealth of accessories you can get for the flexi area desk as much as and including a foot massager and even a fixed stationary bicycle and I could spend another 10 minutes of our precious time covering various alternatives and devices I might but I believe I’m better that they only sent out a fundamental desk since as a standard desk I’m not a fan of the quality assurance at this rate point and I don’t think slapping on a bunch of extras is the relocation when the core product isn’t what it must be they do provide a 30-day trial if you’re just morbidly curious and they service warranty their desks for three years really desk is 5 years and uplift desk is 7 years if you are Flexispot Value Electric Height Adjustable Desk Ec1S+R4830N
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in regards to video gaming and efficiency however I would invest the extra money it’s gon na require to enter into a higher end manufacturer like uplift desk or really desk and I haven’t personally utilized really desk items so I can’t speak on it however their credibility is excellent big thanks to flexi spot for sending this out for evaluation regrettably I can not advise this unit and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a problem with viewing as how both the desktop and the casters arrived damaged but from a client standpoint you ‘d probably be really thrilled to get this in