Find Flexispot Vici 48W Quick-install Height-adjustable Desk Ec9B 2022

today we’re taking a look at a motorized sit-stand desk…Flexispot Vici 48W Quick-install Height-adjustable Desk Ec9B… you may have seen my review on the uplift desk, if not …

In general, I need to state I like the Flexispot E7.

here are a lot of things to enjoy about the Flexispot E7. In general, my experience was very positive.

It’s extremely easy to assemble, and it took my 11-year-old child and I (I mostly simply supervised) under an hour from start to finish.
It’s super strong and can hold a lot of weight. If you don’t believe me, have a look at the video listed below of it operating while there’s an individual lying down on it.

The electric raise/lower feature is not only easy to use and quick, but it’s also surprisingly smooth and quiet.
You can set your preferred standing and sitting heights, and it will remember them, making it easy to change between the two without offering it much thought.
On top of being practical, it also looks terrific in my workplace (I got the bamboo leading desk).
The width is likewise adjustable so it can fit in smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a monitor stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is likewise useful if your furry colleague likes to chew on or play with your cables.
Flexispot has choices that are much more economical than many other desks like it.
Flexispot Standing Desk Evaluation – Cons

Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of features that I wasn’t always a huge fan of:

The package that the desk was available in was heavy, so bringing it inside was a group effort, but this is simply a consequence of how durable the Flexispot is.
The convenient cable television tray was a little bit complicated to install. In the end, you eventually slip it under screws, which wasn’t very clear from the instructions.
You will need to buy an anti-fatigue mat to stay comfy, however this is a good idea for any standing desks, so I can’t fault Flexispot for that.

When it got here and I saw how heavy it was, I was both ecstatic (since this implied it was going to be sturdy) and likewise a little reluctant (because all of us understand just how much of an obstacle putting together furnishings can be).

Thankfully, with the help of an instructional YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only problem I have with assembly was the cable tray, which I discovered wasn’t described well in the guidelines.

Once assembled, I love the sleek appearance of this desk. I’m positive any of the many diverse finishes that it can be found in would look terrific in any workplace, and the adjustable width makes it easy to fit it in even the tiniest of office.

The quiet operation and height memory settings make it simple, effective, and peaceful to switch in between sitting and standing as often times as you desire throughout the day.

This desk is durable. It can hold up to 335 pounds even while in operation, so if you have a large desktop (or want to take a nap on it for some reason) it has you covered. It will also equally distribute weight no matter how unbalanced the weight you put on it is, it will not wiggle or wobble.

 

in that video is pretty kitted out as the desk we’re looking at today is pretty fundamental I attempted to get as near that as I could on uplifts site with similar configurations the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is in fact 5 inches longer but you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for evaluation but as you need to know by now doesn’t impact my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping till the end of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can perhaps get lacking even any cable grommets for travel through the outside container

for the desktop was not damaged in any way which is absolutely strange because I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted simply very rough guy if I had acquired this I ‘d have been on the phone with customer support instantly they did likewise handled to miss drilling the pilot holes where you can attach the control box to the desktop a lot of needing to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really quite uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cables running to it from each component to support motorized function unusually absolutely where any type of cable television management materials whatsoever the frame on this system is a single motor double phase style versus the double motor three-stage design that comes requirement with the uplift desk this can be upgraded too to both the double phase double motor and a three-stage double motor which pushes the cost of the desk up

an extra 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than high adequate even for me and I stay at 6 foot for this design does come basic with the control panel that allows for up-and-down movement plus 3 memory areas with an LED readout to tell you the desk height the single motor design utilizes this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is very quiet as in barely audible this outside a cost would be the one advantage I would provide this system over the uplift desk and I wish to take care here due to the fact that this isn’t a hit piece this desk is 240 dollars cheaper than the similar uplift design over 35% cheaper even if you upgrade this flexi spot test to the dual motor three-stage style it still can be found in a hundred and seventy dollars cheaper than the uplift but cheaper does not imply low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll definitely offer it that but the lateral stability of this desk the horizontal movement at this rate point it’s inappropriate it’s add insult to injury here they include a little security baffle this little steel piece that mounts to the frame and covers a part of this turning driveshaft when

this desk sees any lateral motion at all the drive shaft hits the noise and this baffle is definitely shocking to leading things off I chose to add rolling casters to this desk this was a $30 upgrade and two of those four casters arrived damaged as well my prepare for this desk at this moment is to lose the desk top and came with all together and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to film products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is an investment in quality office furniture that will last you this at finest feels like a cheaper replica of that it just does not feel quality and the difference in between this desk and my main desk is night and day do do not hesitate to have a look at their site too which also feels strangely comparable to one of their rivals there’s a wealth of accessories you can get for the flexi area desk approximately and including a foot massager and even a fixed stationary bicycle and I might invest another 10 minutes of our precious time covering various choices and devices I could however I think I’m better that they only sent a fundamental desk because as a basic desk I’m not a fan of the quality assurance at this rate point and I don’t believe slapping on a lot of extras is the relocation when the core item isn’t what it ought to be they do provide a 30-day trial if you’re just morbidly curious and they warranty their desks for 3 years really desk is five years and uplift desk is seven years if you are Flexispot Vici 48W Quick-install Height-adjustable Desk Ec9B

in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of gaming and performance but I would spend the additional money it’s gon na require to get into a greater end maker like uplift desk or very desk and I haven’t personally used extremely desk items so I can’t speak on it but their reputation is great huge thanks to flexi area for sending this out for review sadly I can not recommend this unit and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a problem with viewing as how both the desktop and the casters got here harmed however from a consumer viewpoint you ‘d probably be really delighted to get this in

Published