today we’re having a look at a motorized sit-stand desk…Flexispot Vici Ef1 2 Tier Standing Desk… you might have seen my review on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are lots of things to like about the Flexispot E7. In general, my experience was very favorable.
It’s very simple to put together, and it took my 11-year-old daughter and I (I mainly simply monitored) under an hour from start to finish.
It’s super tough and can hold a lot of weight. If you do not think me, have a look at the video listed below of it operating while there’s a person resting on it.
The electric raise/lower feature is not only easy to use and quick, however it’s likewise remarkably smooth and peaceful.
You can configure your favored standing and sitting heights, and it will remember them, making it easy to switch between the two without giving it much thought.
On top of being practical, it also looks terrific in my office (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller spaces.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may want to add a display stand to your workstation).
The cable tray keeps all of those charging cords organized, which is likewise valuable if your furry coworker likes to chew on or play with your cables.
Flexispot has alternatives that are far more inexpensive than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a few features that I wasn’t necessarily a substantial fan of:
The plan that the desk came in was heavy, so bringing it inside was a group effort, however this is just a repercussion of how sturdy the Flexispot is.
The practical cable television tray was a little bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t really clear from the directions.
You will need to purchase an anti-fatigue mat to remain comfy, however this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both fired up (since this indicated it was going to be strong) and also a little hesitant (since we all understand just how much of a challenge assembling furniture can be).
Luckily, with the help of an instructional YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I discovered wasn’t discussed well in the guidelines.
Is it worth getting a standing desk?
As soon as assembled, I love the sleek appearance of this desk. I’m confident any of the many diverse surfaces that it is available in would look fantastic in any workplace, and the adjustable width makes it simple to fit it in even the smallest of office.
The quiet operation and height memory settings make it easy, effective, and quiet to switch in between sitting and standing as often times as you want throughout the day.
This desk is durable. It can hold up to 335 pounds even while in operation, so if you have a significant home computer (or want to rest on it for some reason) it has you covered. It will also evenly disperse weight no matter how out of balance the weight you place on it is, it won’t wiggle or wobble.
because video is quite kitted out as the desk we’re taking a look at today is quite standard I tried to get as close to that as I could on uplifts website with comparable configurations the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift design is actually 5 inches longer but you can do a lot with five inches boom yes now for transparency flexi spot did send this desk out for evaluation but as you ought to know by now doesn’t affect my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering till the end of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can potentially get lacking even any cable television grommets for travel through the outside carton
for the desktop was not damaged in any way which is absolutely unusual due to the fact that I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted simply incredibly rough male if I had actually purchased this I ‘d have been on the phone with customer service instantly they did also managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without accidentally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually pretty straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each component to support motorized function oddly definitely where any kind of cable television management products whatsoever the frame on this system is a single motor double stage design versus the dual motor three-stage design that comes requirement with the uplift desk this can be upgraded as well to both the dual phase dual motor and a three-stage dual motor which pushes the cost of the desk up
an extra 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from just under 28 inches to simply over forty 7 point six inches so a max I ‘d it is more than tall adequate even for me and I stay at 6 foot for this design does come standard with the control board that allows for up-and-down movement plus 3 memory spots with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is very quiet as in barely audible this outside a cost would be the one advantage I would offer this unit over the uplift desk and I want to beware here because this isn’t a hit piece this desk is 240 dollars less expensive than the comparable uplift model over 35% less expensive even if you upgrade this flexi area test to the double motor three-stage design it still can be found in a hundred and seventy dollars less expensive than the uplift but cheaper doesn’t indicate cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll certainly give it that but the lateral stability of this desk the horizontal motion at this price point it’s inappropriate it’s add insult to injury here they consist of a little security baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft hits this baffle and the sound is absolutely shocking to top things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters arrived harmed too my prepare for this desk at this moment is to lose the desk top and included all together and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it simpler to movie items without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality workplace furniture that will last you this at finest feels like a cheaper imitation of that it simply does not feel quality and the distinction between this desk and my main desk is night and day do feel free to take a look at their website too which also feels strangely similar to among their competitors there’s a wealth of accessories you can get for the flexi spot desk approximately and including a foot massager and even a stationary stationary bicycle and I might invest another 10 minutes of our valuable time covering different choices and accessories I might but I believe I’m better that they just sent a standard desk since as a basic desk I’m not a fan of the quality assurance at this cost point and I do not think slapping on a lot of extras is the relocation when the core product isn’t what it should be they do use a 30-day trial if you’re simply morbidly curious and they warranty their desks for 3 years extremely desk is 5 years and uplift desk is seven years if you are Flexispot Vici Ef1 2 Tier Standing Desk
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in regards to video gaming and productivity but I would invest the extra money it’s gon na require to enter into a higher end producer like uplift desk or extremely desk and I have not personally used very desk products so I can’t speak on it but their reputation is great big thanks to flexi spot for sending this out for evaluation sadly I can not suggest this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had a problem with viewing as how both the desktop and the casters got here harmed but from a client viewpoint you ‘d probably be really thrilled to get this in