today we’re having a look at a motorized sit-stand desk…Flexispot Willow Standing Desk… you might have seen my review on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was very favorable.
It’s really easy to assemble, and it took my 11-year-old daughter and I (I mostly simply monitored) under an hour from start to finish.
It’s super durable and can hold a great deal of weight. Check out the video below of it operating while there’s an individual lying down on it if you do not believe me.
The electric raise/lower function is not just easy to use and quick, however it’s also surprisingly smooth and peaceful.
You can set your preferred standing and sitting heights, and it will remember them, making it easy to change between the two without providing it much thought.
On top of being practical, it likewise looks great in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can fit in smaller sized spaces.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may want to include a display stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is likewise valuable if your furry colleague likes to chew on or have fun with your cables.
Flexispot has options that are far more affordable than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few functions that I wasn’t always a huge fan of:
The bundle that the desk came in was heavy, so bringing it inside was a group effort, however this is just an effect of how tough the Flexispot is.
The hassle-free cable television tray was a bit confusing to set up. In the end, you ultimately slip it under screws, which wasn’t really clear from the instructions.
You will need to buy an anti-fatigue mat to remain comfortable, but this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both excited (considering that this indicated it was going to be tough) and likewise a little hesitant (due to the fact that all of us understand how much of a difficulty putting together furnishings can be).
Thankfully, with the help of a training YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t explained well in the guidelines.
Is it worth getting a standing desk?
Once put together, I like the sleek appearance of this desk. I’m positive any of the many varied surfaces that it is available in would look terrific in any office, and the adjustable width makes it simple to fit it in even the smallest of home offices.
The peaceful operation and height memory settings make it easy, effective, and quiet to change between sitting and standing as lot of times as you want throughout the day.
This desk is strong. It can hold up to 335 lbs even while in operation, so if you have a substantial desktop computer (or want to sleep on it for some reason) it has you covered. It will also evenly distribute weight no matter how unbalanced the weight you place on it is, it won’t wiggle or wobble.
in that video is pretty kitted out as the desk we’re looking at today is pretty basic I tried to get as near to that as I could on uplifts site with similar configurations the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift model is really five inches longer however you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for evaluation however as you ought to know by now does not affect my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping until the end of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can potentially get doing not have even any cable grommets for go through the outside carton
for the desktop was not damaged in any way which is entirely strange because I might shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just incredibly rough guy if I had actually bought this I ‘d have been on the phone with customer service right away they did likewise managed to miss drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really quite uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each part to support motorized function unusually absolutely where any sort of cable television management materials whatsoever the frame on this system is a single motor double stage style versus the double motor three-stage design that comes standard with the uplift desk this can be updated as well to both the dual phase dual motor and a three-stage dual motor which pushes the expense of the desk up
an additional 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from simply under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than tall sufficient even for me and I stay at 6 foot for this model does come basic with the control board that enables up-and-down motion plus three memory spots with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which has to be changed as the width of the desk is adjusted the motor operation itself while it might be sluggish is very quiet as in barely audible this outside a cost would be the one advantage I would offer this unit over the uplift desk and I want to beware here because this isn’t a hit piece this desk is 240 dollars cheaper than the equivalent uplift design over 35% less expensive even if you update this flexi area test to the double motor three-stage style it still is available in a hundred and seventy dollars less expensive than the uplift but cheaper does not indicate inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll definitely offer it that but the lateral stability of this desk the horizontal movement at this rate point it’s unacceptable it’s rub salt in the wound here they include a little safety baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft hits the noise and this baffle is definitely shocking to leading things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those four casters showed up harmed also my prepare for this desk at this moment is to lose the desk top and came with completely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it simpler to movie products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality office furnishings that will last you this at finest feels like a more affordable imitation of that it just does not feel quality and the difference in between this desk and my primary desk is night and day do do not hesitate to take a look at their website as well which also feels strangely similar to one of their rivals there’s a wealth of devices you can get for the flexi area desk as much as and including a foot massager and even a stationary exercise bike and I could spend another 10 minutes of our valuable time covering different options and accessories I might however I think I’m better that they only sent a standard desk since as a basic desk I’m not a fan of the quality control at this cost point and I do not think slapping on a bunch of bonus is the relocation when the core product isn’t what it need to be they do provide a 30-day trial if you’re just morbidly curious and they warranty their desks for three years extremely desk is 5 years and uplift desk is 7 years if you are Flexispot Willow Standing Desk
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of gaming and productivity but I would invest the extra money it’s gon na require to enter a higher end manufacturer like uplift desk or very desk and I have not personally used very desk products so I can’t speak on it but their reputation is excellent big thanks to flexi spot for sending this out for evaluation unfortunately I can not recommend this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had a problem with viewing as how both the desktop and the casters arrived harmed but from a consumer standpoint you ‘d most likely be actually thrilled to get this in