today we’re having a look at a motorized sit-stand desk…Flexispot Wobble… you might have seen my evaluation on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are lots of things to enjoy about the Flexispot E7. In general, my experience was really positive.
It’s really easy to put together, and it took my 11-year-old daughter and I (I primarily simply supervised) under an hour from start to finish.
It’s super tough and can hold a great deal of weight. If you don’t think me, have a look at the video below of it operating while there’s a person lying down on it.
The electric raise/lower feature is not only easy to use and fast, but it’s also remarkably smooth and quiet.
You can configure your preferred standing and sitting heights, and it will remember them, making it easy to change in between the two without giving it much idea.
On top of being practical, it likewise looks fantastic in my workplace (I got the bamboo top desk).
The width is likewise adjustable so it can suit smaller sized areas.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a monitor stand to your workstation).
The cable tray keeps all of those charging cords organized, which is likewise handy if your furry coworker likes to chew on or have fun with your cable televisions.
Flexispot has choices that are even more cost effective than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of features that I wasn’t always a big fan of:
The bundle that the desk can be found in was heavy, so bringing it inside was a group effort, but this is simply a consequence of how tough the Flexispot is.
The practical cable tray was a bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t really clear from the directions.
You will need to buy an anti-fatigue mat to stay comfy, but this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both thrilled (because this implied it was going to be tough) and also a little hesitant (because we all know just how much of a challenge putting together furniture can be).
Luckily, with the help of a training YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I discovered wasn’t described well in the instructions.
Is it worth getting a standing desk?
Once assembled, I enjoy the smooth look of this desk. I’m confident any of the many varied finishes that it comes in would look great in any workplace, and the adjustable width makes it simple to fit it in even the smallest of office.
The peaceful operation and height memory settings make it simple, effective, and quiet to switch in between sitting and standing as many times as you want throughout the day.
Lastly, this desk is sturdy. It can hold up to 335 lbs even while in operation, so if you have a substantial desktop (or wish to sleep on it for some reason) it has you covered. It will likewise equally disperse weight no matter how out of balance the weight you put on it is, it will not wiggle or wobble.
because video is quite kitted out as the desk we’re looking at today is pretty standard I attempted to get as close to that as I might on uplifts website with equivalent setups the flexi area desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift design is really 5 inches longer however you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for review but as you must know by now doesn’t impact my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping till the end of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can potentially get lacking even any cable grommets for travel through the outdoors container
for the desktop was not damaged in any way which is utterly strange due to the fact that I might shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just very rough guy if I had actually acquired this I ‘d have been on the phone with customer service instantly they did also managed to miss drilling the pilot holes where you can attach the control box to the desktop a great deal of having to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually pretty simple the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each part to support motorized function unusually definitely where any type of cable television management materials whatsoever the frame on this system is a single motor double phase design versus the double motor three-stage style that comes standard with the uplift desk this can be upgraded also to both the double stage double motor and a three-stage dual motor which presses the expense of the desk up
an additional 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from just under 28 inches to just over forty 7 point six inches so a max I ‘d it is more than tall adequate even for me and I remain at 6 foot for this model does come standard with the control board that allows for up-and-down movement plus 3 memory spots with an LED readout to inform you the desk height the single motor design uses this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be sluggish is very quiet as in barely audible this outside a price would be the one benefit I would give this unit over the uplift desk and I want to beware here due to the fact that this isn’t a hit piece this desk is 240 dollars cheaper than the similar uplift model over 35% less expensive even if you upgrade this flexi spot test to the dual motor three-stage design it still comes in a hundred and seventy dollars cheaper than the uplift but more affordable does not suggest inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll certainly provide it that but the lateral stability of this desk the horizontal motion at this price point it’s undesirable it’s add insult to injury here they include a little safety baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft strikes this baffle and the sound is absolutely shocking to leading things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those four casters got here harmed too my plan for this desk at this moment is to lose the desk top and came with all together and replace it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops up to 63 inches wide and 31 and a half inches deep so this will roll around the studio make it simpler to film items without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is a financial investment in quality office furnishings that will last you this at best feels like a more affordable imitation of that it simply does not feel quality and the distinction between this desk and my primary desk is night and day do do not hesitate to check out their website too which also feels strangely comparable to among their rivals there’s a wealth of devices you can get for the flexi spot desk as much as and including a foot massager and even a stationary stationary bicycle and I might invest another 10 minutes of our precious time covering numerous alternatives and accessories I could however I believe I’m happier that they only sent a standard desk since as a standard desk I’m not a fan of the quality assurance at this cost point and I do not believe slapping on a lot of bonus is the relocation when the core product isn’t what it must be they do offer a 30-day trial if you’re simply morbidly curious and they warranty their desks for three years extremely desk is five years and uplift desk is seven years if you are Flexispot Wobble
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of video gaming and performance but I would spend the extra money it’s gon na require to enter a greater end producer like uplift desk or really desk and I haven’t personally utilized really desk products so I can’t speak on it but their credibility is great big thanks to flexi area for sending this out for review unfortunately I can not recommend this system and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had an issue with seeing as how both the desktop and the casters arrived harmed but from a customer perspective you ‘d most likely be truly excited to get this in