today we’re having a look at a motorized sit-stand desk…Flexispot Won’t Go Up… you may have seen my review on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are lots of things to enjoy about the Flexispot E7. In general, my experience was extremely positive.
It’s very simple to put together, and it took my 11-year-old daughter and I (I mostly simply supervised) under an hour from start to finish.
It’s very durable and can hold a lot of weight. Check out the video below of it operating while there’s an individual lying down on it if you do not think me.
The electrical raise/lower function is not just easy to use and quick, however it’s likewise surprisingly smooth and peaceful.
You can set your preferred standing and sitting heights, and it will remember them, making it simple to switch in between the two without offering it much thought.
On top of being practical, it also looks excellent in my workplace (I got the bamboo top desk).
The width is also adjustable so it can suit smaller areas.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might want to include a monitor stand to your workstation).
The cable television tray keeps all of those charging cords arranged, which is likewise useful if your furry coworker likes to chew on or play with your cables.
Flexispot has choices that are much more budget friendly than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a few features that I wasn’t always a big fan of:
The package that the desk was available in was heavy, so bringing it inside was a group effort, however this is simply a repercussion of how strong the Flexispot is.
The practical cable tray was a bit confusing to set up. In the end, you ultimately slip it under screws, which wasn’t very clear from the directions.
You will require to purchase an anti-fatigue mat to stay comfortable, but this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both ecstatic (since this implied it was going to be durable) and likewise a little reluctant (because all of us know how much of an obstacle assembling furnishings can be).
Fortunately, with the help of an educational YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I discovered wasn’t described well in the directions.
Is it worth getting a standing desk?
Once put together, I like the sleek look of this desk. I’m confident any of the many diverse finishes that it comes in would look excellent in any workplace, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it easy, effective, and quiet to change in between sitting and standing as often times as you want throughout the day.
This desk is tough. It can hold up to 335 lbs even while in operation, so if you have a substantial home computer (or wish to rest on it for some reason) it has you covered. It will also evenly distribute weight no matter how unbalanced the weight you place on it is, it won’t wiggle or wobble.
in that video is quite kitted out as the desk we’re taking a look at today is pretty fundamental I tried to get as near that as I could on uplifts site with comparable configurations the flexi spot desk we’re looking at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift model is actually 5 inches longer however you can do a lot with 5 inches boom yes now for openness flexi spot did send this desk out for review but as you must understand by now does not affect my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping until completion of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can potentially get lacking even any cable television grommets for pass through the outside container
for the desktop was not harmed in any way which is utterly unusual because I might shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted simply extremely rough man if I had actually purchased this I ‘d have been on the phone with customer support immediately they did likewise handled to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without accidentally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact pretty simple the entire thing came together in about 45 minutes and despite the fact that there’s cables running to it from each component to support motorized function strangely definitely where any type of cable television management materials whatsoever the frame on this unit is a single motor dual phase style versus the double motor three-stage style that comes standard with the uplift desk this can be upgraded also to both the double stage double motor and a three-stage dual motor which presses the cost of the desk up
an extra 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to simply over forty seven point six inches so a max I ‘d it is more than tall enough even for me and I remain at 6 foot for this design does come basic with the control panel that permits up-and-down movement plus 3 memory areas with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which needs to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is very peaceful as in barely audible this outside a cost would be the one advantage I would give this system over the uplift desk and I want to be careful here because this isn’t a hit piece this desk is 240 dollars less expensive than the similar uplift design over 35% less expensive even if you update this flexi spot test to the double motor three-stage style it still comes in a hundred and seventy dollars cheaper than the uplift however cheaper doesn’t mean cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll absolutely offer it that however the lateral stability of this desk the horizontal motion at this price point it’s undesirable it’s add insult to injury here they consist of a little safety baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft hits the noise and this baffle is definitely infuriating to top things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those four casters got here damaged too my prepare for this desk at this point is to lose the desk top and included entirely and replace it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops up to 63 inches wide and 31 and a half inches deep so this will roll around the studio make it easier to film items without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is a financial investment in quality office furniture that will last you this at best feels like a less expensive imitation of that it just doesn’t feel quality and the difference between this desk and my primary desk is night and day do do not hesitate to check out their site as well which also feels eerily comparable to one of their rivals there’s a wealth of devices you can get for the flexi area desk approximately and consisting of a foot massager and even a stationary stationary bicycle and I might invest another 10 minutes of our valuable time covering different choices and devices I might however I think I’m better that they just sent a fundamental desk since as a standard desk I’m not a fan of the quality control at this cost point and I do not believe slapping on a lot of bonus is the move when the core product isn’t what it must be they do offer a 30-day trial if you’re simply morbidly curious and they service warranty their desks for three years really desk is five years and uplift desk is seven years if you are Flexispot Won’t Go Up
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in regards to video gaming and efficiency but I would spend the additional money it’s gon na require to enter into a higher end maker like uplift desk or really desk and I haven’t personally used very desk products so I can’t speak on it but their reputation is very good huge thanks to flexi spot for sending this out for evaluation regrettably I can not advise this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had an issue with seeing as how both the desktop and the casters got here harmed however from a consumer viewpoint you ‘d most likely be truly thrilled to get this in