today we’re having a look at a motorized sit-stand desk…Flexispot Youtube Ads… you might have seen my review on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are a lot of things to enjoy about the Flexispot E7. In general, my experience was extremely positive.
It’s really easy to put together, and it took my 11-year-old child and I (I primarily simply supervised) under an hour from start to finish.
It’s incredibly tough and can hold a lot of weight. If you don’t believe me, check out the video below of it operating while there’s an individual resting on it.
The electrical raise/lower feature is not just easy to use and quickly, but it’s also remarkably smooth and peaceful.
You can configure your favored standing and sitting heights, and it will remember them, making it easy to switch in between the two without providing it much thought.
On top of being functional, it likewise looks terrific in my workplace (I got the bamboo top desk).
The width is also adjustable so it can suit smaller spaces.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might want to include a monitor stand to your workstation).
The cable television tray keeps all of those charging cords arranged, which is also handy if your furry colleague likes to chew on or play with your cables.
Flexispot has alternatives that are much more budget-friendly than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few features that I wasn’t necessarily a big fan of:
The package that the desk came in was heavy, so bringing it inside was a group effort, however this is just a repercussion of how durable the Flexispot is.
The convenient cable television tray was a bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t really clear from the directions.
You will need to buy an anti-fatigue mat to stay comfy, however this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both fired up (because this suggested it was going to be sturdy) and also a little hesitant (because we all know just how much of a difficulty assembling furnishings can be).
The good news is, with the help of a training YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t explained well in the guidelines.
Is it worth getting a standing desk?
Once assembled, I love the smooth look of this desk. I’m positive any of the many varied surfaces that it can be found in would look great in any office, and the adjustable width makes it simple to fit it in even the tiniest of office.
The quiet operation and height memory settings make it easy, efficient, and quiet to change in between sitting and standing as many times as you want throughout the day.
This desk is tough. It can hold up to 335 lbs even while in operation, so if you have a large desktop computer (or want to rest on it for some reason) it has you covered. It will also uniformly disperse weight no matter how unbalanced the weight you place on it is, it won’t wiggle or wobble.
because video is quite kitted out as the desk we’re looking at today is quite basic I tried to get as near that as I could on uplifts site with equivalent configurations the flexi area desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift design is in fact five inches longer however you can do a lot with five inches boom yes now for transparency flexi spot did send this desk out for review however as you should understand by now does not impact my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping up until the end of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can possibly get lacking even any cable grommets for pass through the outside container
for the desktop was not damaged in any way which is entirely unusual because I could shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just incredibly rough man if I had purchased this I ‘d have been on the phone with customer service immediately they did also handled to miss drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without accidentally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually pretty simple the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each part to support motorized function unusually definitely where any sort of cable management products whatsoever the frame on this system is a single motor dual stage style versus the double motor three-stage style that comes standard with the uplift desk this can be updated as well to both the dual phase double motor and a three-stage double motor which presses the cost of the desk up
an extra 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from simply under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than tall sufficient even for me and I remain at 6 foot for this model does come basic with the control panel that allows for up-and-down motion plus 3 memory spots with an LED readout to inform you the desk height the single motor design uses this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is extremely peaceful as in barely audible this outside a cost would be the one benefit I would provide this system over the uplift desk and I want to take care here since this isn’t a hit piece this desk is 240 dollars cheaper than the similar uplift design over 35% less expensive even if you update this flexi spot test to the dual motor three-stage design it still is available in a hundred and seventy dollars less expensive than the uplift however more affordable doesn’t indicate cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll certainly offer it that however the lateral stability of this desk the horizontal movement at this rate point it’s inappropriate it’s add fuel to the fire here they include a little safety baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft strikes this baffle and the sound is absolutely shocking to top things off I chose to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters showed up harmed too my prepare for this desk at this moment is to lose the desk top and included all together and replace it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops approximately 63 inches broad and 31 and a half inches deep so this will roll around the studio make it simpler to film products without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality office furnishings that will last you this at finest feels like a less expensive imitation of that it simply does not feel quality and the difference between this desk and my main desk is night and day do do not hesitate to have a look at their site too which likewise feels strangely similar to among their competitors there’s a wealth of accessories you can get for the flexi area desk as much as and consisting of a foot massager and even a fixed exercise bike and I might spend another 10 minutes of our precious time covering numerous alternatives and devices I could but I think I’m happier that they just sent out a basic desk because as a standard desk I’m not a fan of the quality assurance at this cost point and I don’t think slapping on a lot of extras is the move when the core product isn’t what it should be they do use a 30-day trial if you’re just morbidly curious and they guarantee their desks for three years extremely desk is 5 years and uplift desk is 7 years if you are Flexispot Youtube Ads
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in regards to video gaming and performance however I would invest the additional money it’s gon na take to enter into a greater end maker like uplift desk or very desk and I have not personally used very desk items so I can’t speak on it but their credibility is excellent big thanks to flexi area for sending this out for evaluation regrettably I can not suggest this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a problem with seeing as how both the desktop and the casters showed up harmed but from a customer viewpoint you ‘d most likely be truly thrilled to get this in