today we’re taking a look at a motorized sit-stand desk…Lagkapten Flexispot… you might have seen my evaluation on the uplift desk, if not …
In general, I need to say I like the Flexispot E7.
here are lots of things to enjoy about the Flexispot E7. In general, my experience was extremely favorable.
It’s extremely simple to assemble, and it took my 11-year-old child and I (I mostly just supervised) under an hour from start to finish.
It’s super sturdy and can hold a great deal of weight. Examine out the video below of it operating while there’s an individual lying down on it if you don’t believe me.
The electrical raise/lower function is not only easy to use and fast, however it’s also surprisingly smooth and peaceful.
You can configure your preferred standing and sitting heights, and it will remember them, making it simple to switch between the two without providing it much idea.
On top of being functional, it also looks terrific in my workplace (I got the bamboo top desk).
The width is also adjustable so it can fit in smaller spaces.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might want to add a monitor stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is likewise handy if your furry coworker likes to chew on or play with your cables.
Flexispot has options that are much more budget friendly than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few functions that I wasn’t always a big fan of:
The package that the desk came in was heavy, so bringing it inside was a group effort, however this is just a consequence of how sturdy the Flexispot is.
The hassle-free cable television tray was a bit confusing to set up. In the end, you ultimately slip it under screws, which wasn’t very clear from the guidelines.
You will require to buy an anti-fatigue mat to remain comfortable, but this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both thrilled (given that this implied it was going to be strong) and likewise a little hesitant (due to the fact that we all understand just how much of an obstacle putting together furnishings can be).
Thankfully, with the help of an instructional YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t explained well in the instructions.
Is it worth getting a standing desk?
As soon as assembled, I like the streamlined appearance of this desk. I’m positive any of the many diverse surfaces that it can be found in would look fantastic in any office, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it simple, effective, and quiet to switch between sitting and standing as many times as you want throughout the day.
Finally, this desk is strong. It can hold up to 335 lbs even while in operation, so if you have a substantial desktop computer (or want to rest on it for some reason) it has you covered. It will also equally disperse weight no matter how out of balance the weight you place on it is, it will not wobble or wiggle.
in that video is quite kitted out as the desk we’re taking a look at today is quite basic I attempted to get as near that as I might on uplifts site with equivalent setups the flexi area desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift design is really five inches longer however you can do a lot with 5 inches boom yes now for openness flexi spot did send this desk out for evaluation however as you should know by now doesn’t impact my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping till completion of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can potentially get lacking even any cable grommets for pass through the outside container
for the desktop was not harmed in any way which is utterly bizarre because I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply very rough guy if I had purchased this I ‘d have been on the phone with customer service immediately they did also managed to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of needing to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually quite uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each element to support motorized function strangely absolutely where any type of cable management products whatsoever the frame on this system is a single motor dual stage style versus the dual motor three-stage design that comes requirement with the uplift desk this can be updated too to both the double phase double motor and a three-stage double motor which presses the expense of the desk up
an extra 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to just over forty seven point 6 inches so a max I ‘d it is more than tall adequate even for me and I remain at 6 foot for this design does come basic with the control panel that enables up-and-down movement plus 3 memory areas with an LED readout to inform you the desk height the single motor style utilizes this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be sluggish is extremely quiet as in barely audible this outside a price would be the one benefit I would provide this unit over the uplift desk and I wish to beware here since this isn’t a hit piece this desk is 240 dollars less expensive than the comparable uplift model over 35% less expensive even if you upgrade this flexi area test to the dual motor three-stage style it still is available in a hundred and seventy dollars cheaper than the uplift but more affordable doesn’t mean low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll absolutely provide it that but the lateral stability of this desk the horizontal motion at this cost point it’s undesirable it’s add insult to injury here they include a little safety baffle this little steel piece that installs to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the sound and this baffle is definitely shocking to top things off I decided to include rolling casters to this desk this was a $30 upgrade and two of those 4 casters arrived harmed as well my plan for this desk at this moment is to lose the desk top and featured entirely and change it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops as much as 63 inches broad and 31 and a half inches deep so this will roll around the studio make it much easier to movie products without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality office furnishings that will last you this at finest seems like a less expensive replica of that it just does not feel quality and the difference between this desk and my main desk is night and day do feel free to take a look at their website too which also feels eerily comparable to one of their rivals there’s a wealth of devices you can get for the flexi spot desk as much as and consisting of a foot massager and even a stationary exercise bike and I might spend another 10 minutes of our valuable time covering various alternatives and accessories I could however I think I’m better that they only sent a standard desk due to the fact that as a fundamental desk I’m not a fan of the quality control at this price point and I don’t think slapping on a lot of extras is the relocation when the core product isn’t what it ought to be they do use a 30-day trial if you’re simply morbidly curious and they warranty their desks for three years very desk is 5 years and uplift desk is 7 years if you are Lagkapten Flexispot
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of gaming and efficiency however I would spend the additional money it’s gon na take to enter a higher end manufacturer like uplift desk or extremely desk and I haven’t personally used really desk products so I can’t speak on it but their reputation is excellent big thanks to flexi area for sending this out for review sadly I can not suggest this system and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a problem with seeing as how both the desktop and the casters arrived harmed but from a client perspective you ‘d most likely be truly delighted to get this in