today we’re taking a look at a motorized sit-stand desk…Loctek Flexispot… you may have seen my evaluation on the uplift desk, if not …

In general, I must say I like the Flexispot E7.

here are plenty of things to enjoy about the Flexispot E7. In general, my experience was very positive.

It’s extremely simple to put together, and it took my 11-year-old child and I (I mostly simply supervised) under an hour from start to finish.
It’s super tough and can hold a lot of weight. Examine out the video listed below of it running while there’s a person lying down on it if you do not think me.

The electric raise/lower feature is not only easy to use and fast, however it’s likewise surprisingly smooth and peaceful.
You can program your preferred standing and sitting heights, and it will remember them, making it simple to change between the two without offering it much thought.
On top of being practical, it likewise looks fantastic in my office (I got the bamboo top desk).
The width is also adjustable so it can suit smaller areas.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may want to include a monitor stand to your workstation).
The cable tray keeps all of those charging cords arranged, which is also useful if your furry colleague likes to chew on or have fun with your cable televisions.
Flexispot has choices that are far more budget-friendly than many other desks like it.
Flexispot Standing Desk Review – Cons

Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a few functions that I wasn’t always a huge fan of:

The plan that the desk can be found in was heavy, so bringing it inside was a group effort, however this is just an effect of how tough the Flexispot is.
The hassle-free cable television tray was a little bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t extremely clear from the guidelines.
You will require to buy an anti-fatigue mat to stay comfortable, however this is a great concept for any standing desks, so I can’t fault Flexispot for that.

When it got here and I saw how heavy it was, I was both fired up (since this indicated it was going to be durable) and likewise a little hesitant (due to the fact that we all understand how much of a challenge assembling furniture can be).

Thankfully, with the help of an educational YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only problem I have with assembly was the cable tray, which I discovered wasn’t described well in the directions.

Is it worth getting a standing desk?

When assembled, I like the smooth appearance of this desk. I’m confident any of the many varied finishes that it comes in would look great in any office, and the adjustable width makes it simple to fit it in even the tiniest of home offices.

The quiet operation and height memory settings make it easy, efficient, and peaceful to switch between sitting and standing as often times as you want throughout the day.

This desk is strong. It can hold up to 335 lbs even while in operation, so if you have a hefty home computer (or wish to take a nap on it for some reason) it has you covered. It will likewise evenly disperse weight no matter how unbalanced the weight you put on it is, it won’t wobble or wiggle.

 

because video is quite kitted out as the desk we’re taking a look at today is quite basic I attempted to get as close to that as I could on uplifts site with comparable configurations the flexi area desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift design is actually five inches longer but you can do a lot with five inches boom yes now for openness flexi area did send this desk out for evaluation but as you must understand by now doesn’t affect my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping till the end of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can perhaps get doing not have even any cable grommets for travel through the outdoors carton

for the desktop was not damaged in any way which is utterly bizarre because I might shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted simply very rough guy if I had actually acquired this I ‘d have been on the phone with customer support immediately they did also managed to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without accidentally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really quite uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each part to support motorized function unusually definitely where any sort of cable television management products whatsoever the frame on this system is a single motor double stage design versus the dual motor three-stage style that comes standard with the uplift desk this can be upgraded too to both the double stage dual motor and a three-stage double motor which presses the expense of the desk up

an additional 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from simply under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than tall sufficient even for me and I remain at 6 foot for this design does come standard with the control panel that allows for up-and-down motion plus three memory areas with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which has to be changed as the width of the desk is adjusted the motor operation itself while it might be sluggish is very quiet as in barely audible this outside a rate would be the one advantage I would give this system over the uplift desk and I want to beware here due to the fact that this isn’t a hit piece this desk is 240 dollars less expensive than the comparable uplift model over 35% less expensive even if you upgrade this flexi spot test to the dual motor three-stage style it still can be found in a hundred and seventy dollars less expensive than the uplift but more affordable does not suggest inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll absolutely offer it that however the lateral stability of this desk the horizontal motion at this price point it’s inappropriate it’s add insult to injury here they include a little security baffle this little steel piece that installs to the frame and covers a part of this rotating driveshaft when

this desk sees any lateral movement at all the drive shaft strikes the noise and this baffle is absolutely frustrating to top things off I decided to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters arrived harmed as well my plan for this desk at this moment is to lose the desk top and featured all together and change it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches broad and 31 and a half inches deep so this will roll around the studio make it much easier to film products without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality workplace furniture that will last you this at best feels like a more affordable replica of that it simply doesn’t feel quality and the distinction between this desk and my primary desk is night and day do do not hesitate to take a look at their site also which also feels eerily comparable to among their competitors there’s a wealth of accessories you can get for the flexi area desk up to and consisting of a foot massager and even a stationary stationary bicycle and I might invest another 10 minutes of our precious time covering various options and accessories I could however I believe I’m better that they only sent a fundamental desk due to the fact that as a fundamental desk I’m not a fan of the quality control at this rate point and I do not think slapping on a bunch of additionals is the relocation when the core item isn’t what it must be they do use a 30-day trial if you’re simply morbidly curious and they guarantee their desks for 3 years very desk is 5 years and uplift desk is 7 years if you are Loctek Flexispot

in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in regards to gaming and performance however I would spend the money it’s gon na require to enter a greater end maker like uplift desk or extremely desk and I haven’t personally utilized really desk items so I can’t speak on it however their track record is excellent big thanks to flexi spot for sending this out for evaluation regrettably I can not recommend this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had an issue with seeing as how both the desktop and the casters showed up harmed but from a consumer standpoint you ‘d probably be truly excited to get this in

today we’re having a look at a motorized sit-stand desk…Loctek / Flexispot… you might have seen my evaluation on the uplift desk, if not …

In general, I must state I like the Flexispot E7.

here are lots of things to like about the Flexispot E7. In general, my experience was really positive.

It’s very simple to assemble, and it took my 11-year-old daughter and I (I mostly just monitored) under an hour from start to finish.
It’s incredibly tough and can hold a lot of weight. Examine out the video listed below of it operating while there’s a person lying down on it if you do not think me.

The electrical raise/lower function is not only easy to use and fast, however it’s likewise remarkably smooth and peaceful.
You can program your favored standing and sitting heights, and it will remember them, making it easy to change between the two without providing it much thought.
On top of being practical, it likewise looks fantastic in my office (I got the bamboo top desk).
The width is also adjustable so it can fit in smaller spaces.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a monitor stand to your workstation).
The cable television tray keeps all of those charging cables organized, which is also useful if your furry coworker likes to chew on or have fun with your cable televisions.
Flexispot has choices that are far more economical than many other desks like it.
Flexispot Standing Desk Review – Cons

Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of functions that I wasn’t necessarily a substantial fan of:

The plan that the desk can be found in was heavy, so bringing it inside was a group effort, however this is simply an effect of how sturdy the Flexispot is.
The hassle-free cable television tray was a bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the directions.
You will need to buy an anti-fatigue mat to stay comfortable, however this is a great concept for any standing desks, so I can’t fault Flexispot for that.

When it arrived and I saw how heavy it was, I was both thrilled (because this indicated it was going to be durable) and also a little hesitant (due to the fact that we all know how much of a challenge assembling furniture can be).

Fortunately, with the help of an educational YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only problem I have with assembly was the cable television tray, which I found wasn’t discussed well in the guidelines.

Is it worth getting a standing desk?

As soon as assembled, I love the smooth look of this desk. I’m positive any of the many diverse finishes that it can be found in would look fantastic in any office, and the adjustable width makes it easy to fit it in even the smallest of home offices.

The quiet operation and height memory settings make it simple, efficient, and peaceful to switch between sitting and standing as lot of times as you want throughout the day.

This desk is sturdy. It can hold up to 335 lbs even while in operation, so if you have a large desktop computer (or want to rest on it for some reason) it has you covered. It will also equally disperse weight no matter how out of balance the weight you place on it is, it won’t wiggle or wobble.

 

because video is quite kitted out as the desk we’re looking at today is quite basic I attempted to get as near to that as I could on uplifts site with comparable setups the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is actually 5 inches longer however you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for evaluation but as you need to know by now doesn’t affect my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering till the end of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can potentially get doing not have even any cable television grommets for pass through the outdoors container

for the desktop was not harmed in any way which is absolutely bizarre due to the fact that I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just very rough male if I had purchased this I ‘d have been on the phone with customer service right away they did likewise handled to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without accidentally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually pretty simple the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each component to support motorized function unusually definitely where any type of cable television management products whatsoever the frame on this system is a single motor dual phase style versus the double motor three-stage style that comes requirement with the uplift desk this can be upgraded as well to both the double phase dual motor and a three-stage dual motor which pushes the cost of the desk up

an extra 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from simply under 28 inches to just over forty 7 point six inches so a max I ‘d it is more than tall adequate even for me and I remain at 6 foot for this design does come standard with the control board that enables up-and-down motion plus three memory areas with an LED readout to tell you the desk height the single motor style utilizes this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is very peaceful as in barely audible this outside a rate would be the one benefit I would offer this unit over the uplift desk and I wish to take care here due to the fact that this isn’t a hit piece this desk is 240 dollars less expensive than the comparable uplift model over 35% more affordable even if you update this flexi area test to the dual motor three-stage design it still can be found in a hundred and seventy dollars less expensive than the uplift but cheaper doesn’t mean inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll definitely give it that but the lateral stability of this desk the horizontal motion at this rate point it’s undesirable it’s add insult to injury here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when

this desk sees any lateral motion at all the drive shaft hits this baffle and the sound is absolutely infuriating to leading things off I chose to add rolling casters to this desk this was a $30 upgrade and two of those four casters showed up damaged as well my prepare for this desk at this moment is to lose the desk top and included all together and change it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops approximately 63 inches broad and 31 and a half inches deep so this will roll around the studio make it easier to film items without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is a financial investment in quality workplace furnishings that will last you this at finest seems like a more affordable imitation of that it simply doesn’t feel quality and the distinction between this desk and my main desk is night and day do feel free to check out their website also which likewise feels eerily similar to one of their competitors there’s a wealth of devices you can get for the flexi spot desk as much as and including a foot massager and even a fixed exercise bike and I might spend another 10 minutes of our valuable time covering numerous options and accessories I might however I believe I’m better that they just sent out a fundamental desk since as a standard desk I’m not a fan of the quality control at this price point and I don’t think slapping on a bunch of extras is the move when the core item isn’t what it must be they do offer a 30-day trial if you’re just morbidly curious and they warranty their desks for three years very desk is 5 years and uplift desk is 7 years if you are Loctek / Flexispot

in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in regards to video gaming and performance however I would spend the additional money it’s gon na require to get into a greater end manufacturer like uplift desk or really desk and I haven’t personally used really desk products so I can’t speak on it but their track record is great huge thanks to flexi spot for sending this out for review sadly I can not advise this unit and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a concern with seeing as how both the desktop and the casters got here harmed however from a consumer standpoint you ‘d probably be actually thrilled to get this in

today we’re having a look at a motorized sit-stand desk…Loctek/Flexispot… you may have seen my evaluation on the uplift desk, if not …

In general, I need to say I like the Flexispot E7.

here are a lot of things to like about the Flexispot E7. In general, my experience was extremely favorable.

It’s very simple to assemble, and it took my 11-year-old daughter and I (I mostly simply supervised) under an hour from start to finish.
It’s incredibly tough and can hold a lot of weight. Check out the video listed below of it operating while there’s a person lying down on it if you do not think me.

The electric raise/lower function is not just easy to use and quickly, however it’s also remarkably smooth and peaceful.
You can program your favored standing and sitting heights, and it will remember them, making it easy to change in between the two without providing it much idea.
On top of being functional, it also looks terrific in my workplace (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller sized areas.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may want to include a monitor stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is also handy if your furry colleague likes to chew on or play with your cable televisions.
Flexispot has options that are much more affordable than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons

Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a couple of features that I wasn’t necessarily a big fan of:

The bundle that the desk came in was heavy, so bringing it inside was a group effort, but this is simply an effect of how strong the Flexispot is.
The convenient cable television tray was a bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t really clear from the directions.
You will require to buy an anti-fatigue mat to stay comfortable, but this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.

When it showed up and I saw how heavy it was, I was both excited (because this implied it was going to be tough) and likewise a little hesitant (because all of us understand how much of a difficulty putting together furniture can be).

Luckily, with the help of an instructional YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t explained well in the guidelines.

Is it worth getting a standing desk?

When put together, I love the sleek appearance of this desk. I’m positive any of the many diverse finishes that it is available in would look great in any office, and the adjustable width makes it easy to fit it in even the tiniest of home offices.

The quiet operation and height memory settings make it easy, efficient, and quiet to switch between sitting and standing as lot of times as you want throughout the day.

Finally, this desk is strong. It can hold up to 335 lbs even while in operation, so if you have a large desktop (or wish to rest on it for some reason) it has you covered. It will likewise equally disperse weight no matter how unbalanced the weight you place on it is, it will not wiggle or wobble.

 

because video is pretty kitted out as the desk we’re taking a look at today is quite standard I attempted to get as near to that as I might on uplifts website with equivalent setups the flexi area desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift model is really five inches longer but you can do a lot with 5 inches boom yes now for openness flexi area did send this desk out for evaluation however as you ought to know by now doesn’t impact my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering until the end of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can potentially get doing not have even any cable grommets for go through the outside container

for the desktop was not harmed in any way which is utterly bizarre since I might shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted just super rough guy if I had acquired this I ‘d have been on the phone with customer support right away they did also handled to miss drilling the pilot holes where you can attach the control box to the desktop a lot of having to do that myself without accidentally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really quite uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each part to support motorized function oddly definitely where any kind of cable television management materials whatsoever the frame on this system is a single motor dual stage design versus the double motor three-stage design that comes requirement with the uplift desk this can be upgraded too to both the dual phase double motor and a three-stage dual motor which pushes the expense of the desk up

an extra 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from simply under 28 inches to just over forty 7 point six inches so a max I ‘d it is more than tall adequate even for me and I remain at 6 foot for this model does come standard with the control board that permits up-and-down motion plus 3 memory spots with an LED readout to inform you the desk height the single motor design utilizes this drive shaft assembly which needs to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is really peaceful as in barely audible this outside a rate would be the one benefit I would provide this unit over the uplift desk and I wish to beware here because this isn’t a hit piece this desk is 240 dollars more affordable than the comparable uplift model over 35% more affordable even if you update this flexi spot test to the double motor three-stage style it still can be found in a hundred and seventy dollars cheaper than the uplift but cheaper doesn’t mean low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll certainly offer it that but the lateral stability of this desk the horizontal movement at this rate point it’s inappropriate it’s rub salt in the wound here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a portion of this rotating driveshaft when

this desk sees any lateral movement at all the drive shaft strikes the noise and this baffle is definitely shocking to leading things off I chose to add rolling casters to this desk this was a $30 upgrade and two of those four casters got here damaged also my plan for this desk at this point is to lose the desk top and came with completely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to movie products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is a financial investment in quality workplace furnishings that will last you this at finest feels like a cheaper replica of that it just doesn’t feel quality and the difference between this desk and my primary desk is night and day do do not hesitate to check out their website also which likewise feels eerily similar to among their rivals there’s a wealth of devices you can get for the flexi spot desk up to and consisting of a foot massager and even a fixed exercise bike and I might invest another 10 minutes of our precious time covering different alternatives and devices I might but I believe I’m happier that they just sent out a standard desk due to the fact that as a basic desk I’m not a fan of the quality control at this price point and I don’t think slapping on a lot of extras is the relocation when the core item isn’t what it need to be they do offer a 30-day trial if you’re simply morbidly curious and they service warranty their desks for 3 years extremely desk is 5 years and uplift desk is 7 years if you are Loctek/Flexispot

in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in regards to video gaming and productivity but I would invest the money it’s gon na take to get into a higher end maker like uplift desk or very desk and I have not personally utilized really desk products so I can’t speak on it however their reputation is excellent huge thanks to flexi area for sending this out for evaluation sadly I can not advise this system and for the record I’m a hundred percent sure they would have gladly changed the parts that I had an issue with seeing as how both the desktop and the casters arrived damaged but from a client perspective you ‘d most likely be really delighted to get this in