today we’re having a look at a motorized sit-stand desk…Maidesite Vs Flexispot… you may have seen my review on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are lots of things to enjoy about the Flexispot E7. In general, my experience was really favorable.
It’s really easy to assemble, and it took my 11-year-old child and I (I mainly simply supervised) under an hour from start to finish.
It’s super tough and can hold a lot of weight. If you don’t believe me, check out the video below of it running while there’s a person lying down on it.
The electric raise/lower function is not just easy to use and quickly, but it’s likewise remarkably smooth and quiet.
You can program your preferred standing and sitting heights, and it will remember them, making it simple to switch between the two without offering it much idea.
On top of being practical, it also looks excellent in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can suit smaller areas.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a screen stand to your workstation).
The cable tray keeps all of those charging cords organized, which is also handy if your furry coworker likes to chew on or have fun with your cable televisions.
Flexispot has options that are far more economical than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of features that I wasn’t necessarily a big fan of:
The plan that the desk came in was heavy, so bringing it inside was a group effort, but this is simply a consequence of how sturdy the Flexispot is.
The hassle-free cable tray was a little bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t very clear from the guidelines.
You will need to purchase an anti-fatigue mat to stay comfy, however this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both thrilled (considering that this suggested it was going to be strong) and likewise a little reluctant (due to the fact that we all understand just how much of a challenge putting together furnishings can be).
Thankfully, with the help of a training YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable television tray, which I discovered wasn’t described well in the guidelines.
Is it worth getting a standing desk?
When assembled, I love the streamlined appearance of this desk. I’m positive any of the many diverse surfaces that it comes in would look terrific in any office, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it simple, efficient, and quiet to change in between sitting and standing as many times as you desire throughout the day.
Last but not least, this desk is strong. It can hold up to 335 lbs even while in operation, so if you have a significant desktop (or wish to sleep on it for some reason) it has you covered. It will also uniformly distribute weight no matter how out of balance the weight you put on it is, it will not wiggle or wobble.
because video is quite kitted out as the desk we’re looking at today is quite basic I attempted to get as close to that as I could on uplifts site with equivalent configurations the flexi area desk we’re taking a look at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift design is actually 5 inches longer however you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for evaluation however as you ought to know by now does not impact my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering until completion of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can possibly get lacking even any cable television grommets for travel through the outdoors container
for the desktop was not harmed in any way which is absolutely strange since I might shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply very rough guy if I had actually acquired this I ‘d have been on the phone with customer service right away they did also managed to miss drilling the pilot holes where you can connect the control box to the desktop a lot of needing to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really pretty simple the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each component to support motorized function strangely absolutely where any type of cable management materials whatsoever the frame on this system is a single motor dual stage style versus the double motor three-stage style that comes requirement with the uplift desk this can be upgraded too to both the double stage dual motor and a three-stage double motor which presses the expense of the desk up
an additional 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from simply under 28 inches to just over forty seven point six inches so a max I ‘d it is more than tall sufficient even for me and I stay at 6 foot for this design does come basic with the control panel that enables up-and-down movement plus three memory spots with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which has to be changed as the width of the desk is adjusted the motor operation itself while it might be sluggish is very quiet as in barely audible this outside a price would be the one advantage I would offer this unit over the uplift desk and I want to beware here due to the fact that this isn’t a hit piece this desk is 240 dollars less expensive than the similar uplift model over 35% cheaper even if you update this flexi area test to the double motor three-stage design it still is available in a hundred and seventy dollars cheaper than the uplift but cheaper doesn’t mean inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll certainly provide it that but the lateral stability of this desk the horizontal motion at this rate point it’s unacceptable it’s add insult to injury here they include a little security baffle this little steel piece that mounts to the frame and covers a part of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the sound is absolutely frustrating to leading things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters showed up damaged too my plan for this desk at this point is to lose the desk top and featured completely and replace it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops approximately 63 inches wide and 31 and a half inches deep so this will roll around the studio make it easier to film items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality workplace furnishings that will last you this at finest seems like a cheaper imitation of that it simply doesn’t feel quality and the difference between this desk and my primary desk is night and day do do not hesitate to have a look at their website too which also feels strangely similar to among their competitors there’s a wealth of accessories you can get for the flexi spot desk as much as and consisting of a foot massager and even a fixed exercise bike and I might invest another 10 minutes of our valuable time covering numerous options and devices I could however I believe I’m happier that they only sent a basic desk since as a basic desk I’m not a fan of the quality control at this price point and I do not believe slapping on a lot of bonus is the relocation when the core item isn’t what it must be they do use a 30-day trial if you’re simply morbidly curious and they guarantee their desks for three years extremely desk is 5 years and uplift desk is seven years if you are Maidesite Vs Flexispot
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of gaming and productivity however I would invest the extra money it’s gon na require to enter into a greater end manufacturer like uplift desk or really desk and I have not personally used really desk products so I can’t speak on it but their reputation is great big thanks to flexi spot for sending this out for evaluation regrettably I can not advise this unit and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a problem with seeing as how both the desktop and the casters showed up damaged however from a customer perspective you ‘d most likely be really thrilled to get this in