today we’re having a look at a motorized sit-stand desk…Rakuten Flexispot… you might have seen my evaluation on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are plenty of things to like about the Flexispot E7. In general, my experience was really positive.
It’s really easy to put together, and it took my 11-year-old daughter and I (I primarily just supervised) under an hour from start to finish.
It’s very tough and can hold a great deal of weight. If you don’t believe me, take a look at the video listed below of it operating while there’s a person resting on it.
The electrical raise/lower function is not just easy to use and quick, but it’s likewise remarkably smooth and peaceful.
You can configure your preferred standing and sitting heights, and it will remember them, making it easy to switch in between the two without providing it much idea.
On top of being functional, it also looks excellent in my office (I got the bamboo top desk).
The width is also adjustable so it can suit smaller spaces.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may wish to include a display stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is also useful if your furry coworker likes to chew on or have fun with your cables.
Flexispot has options that are far more affordable than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a couple of functions that I wasn’t always a substantial fan of:
The bundle that the desk came in was heavy, so bringing it inside was a group effort, however this is simply an effect of how strong the Flexispot is.
The hassle-free cable television tray was a little bit confusing to install. In the end, you eventually slip it under screws, which wasn’t very clear from the guidelines.
You will need to purchase an anti-fatigue mat to remain comfy, however this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both thrilled (given that this indicated it was going to be strong) and also a little hesitant (because we all understand just how much of a challenge assembling furniture can be).
Luckily, with the help of a training YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only problem I have with assembly was the cable television tray, which I discovered wasn’t explained well in the guidelines.
Is it worth getting a standing desk?
As soon as put together, I like the smooth appearance of this desk. I’m positive any of the many diverse finishes that it can be found in would look fantastic in any workplace, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it simple, effective, and quiet to change in between sitting and standing as sometimes as you want throughout the day.
Lastly, this desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a large home computer (or want to rest on it for some reason) it has you covered. It will likewise equally disperse weight no matter how unbalanced the weight you put on it is, it will not wobble or wiggle.
because video is quite kitted out as the desk we’re looking at today is pretty standard I tried to get as near to that as I could on uplifts website with equivalent setups the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is in fact five inches longer but you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for review however as you need to understand by now does not affect my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping until completion of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can potentially get doing not have even any cable television grommets for go through the outside container
for the desktop was not damaged in any way which is absolutely strange due to the fact that I might shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted simply super rough male if I had acquired this I ‘d have been on the phone with customer care right away they did likewise managed to miss drilling the pilot holes where you can attach the control box to the desktop a great deal of having to do that myself without mistakenly drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really pretty simple the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each component to support motorized function oddly definitely where any kind of cable management materials whatsoever the frame on this unit is a single motor double stage design versus the double motor three-stage design that comes standard with the uplift desk this can be updated too to both the dual phase double motor and a three-stage dual motor which pushes the cost of the desk up
an additional 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to just over forty seven point six inches so a max I ‘d it is more than high adequate even for me and I remain at 6 foot for this design does come standard with the control panel that allows for up-and-down movement plus three memory areas with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is extremely quiet as in barely audible this outside a cost would be the one advantage I would offer this system over the uplift desk and I wish to beware here since this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift model over 35% more affordable even if you update this flexi area test to the double motor three-stage design it still can be found in a hundred and seventy dollars cheaper than the uplift however more affordable does not indicate inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll absolutely offer it that however the lateral stability of this desk the horizontal motion at this rate point it’s unacceptable it’s rub salt in the wound here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft hits the sound and this baffle is absolutely infuriating to top things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those four casters showed up damaged also my prepare for this desk at this point is to lose the desk top and came with all together and replace it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to movie products without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality workplace furnishings that will last you this at best seems like a more affordable imitation of that it simply doesn’t feel quality and the difference in between this desk and my primary desk is night and day do feel free to have a look at their website also which also feels eerily comparable to one of their competitors there’s a wealth of devices you can get for the flexi spot desk up to and including a foot massager and even a stationary exercise bike and I might spend another 10 minutes of our precious time covering numerous choices and accessories I could however I believe I’m happier that they just sent out a fundamental desk due to the fact that as a fundamental desk I’m not a fan of the quality assurance at this rate point and I do not believe slapping on a lot of extras is the move when the core item isn’t what it ought to be they do offer a 30-day trial if you’re simply morbidly curious and they guarantee their desks for three years extremely desk is 5 years and uplift desk is 7 years if you are Rakuten Flexispot
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in regards to gaming and efficiency but I would invest the money it’s gon na require to enter a greater end manufacturer like uplift desk or extremely desk and I have not personally utilized very desk items so I can’t speak on it however their credibility is excellent big thanks to flexi area for sending this out for review unfortunately I can not recommend this unit and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a problem with seeing as how both the desktop and the casters got here harmed but from a customer perspective you ‘d most likely be actually delighted to get this in