today we’re taking a look at a motorized sit-stand desk…Review Flexispot Standing Desk… you might have seen my evaluation on the uplift desk, if not …
In general, I need to say I like the Flexispot E7.
here are lots of things to like about the Flexispot E7. In general, my experience was really favorable.
It’s really simple to assemble, and it took my 11-year-old daughter and I (I primarily simply monitored) under an hour from start to finish.
It’s incredibly strong and can hold a lot of weight. If you do not think me, check out the video below of it running while there’s an individual resting on it.
The electric raise/lower function is not only easy to use and fast, but it’s likewise remarkably smooth and quiet.
You can program your favored standing and sitting heights, and it will remember them, making it simple to switch between the two without offering it much idea.
On top of being practical, it likewise looks great in my workplace (I got the bamboo top desk).
The width is also adjustable so it can suit smaller sized spaces.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may want to include a monitor stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is likewise helpful if your furry colleague likes to chew on or play with your cable televisions.
Flexispot has choices that are even more affordable than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a few functions that I wasn’t always a substantial fan of:
The bundle that the desk was available in was heavy, so bringing it inside was a group effort, but this is just an effect of how durable the Flexispot is.
The convenient cable tray was a bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t really clear from the instructions.
You will need to buy an anti-fatigue mat to remain comfy, however this is a great concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both excited (given that this implied it was going to be tough) and likewise a little reluctant (due to the fact that all of us understand just how much of an obstacle putting together furniture can be).
Thankfully, with the help of an instructional YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t discussed well in the directions.
Is it worth getting a standing desk?
When assembled, I love the sleek appearance of this desk. I’m confident any of the many diverse finishes that it comes in would look excellent in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of office.
The quiet operation and height memory settings make it simple, efficient, and peaceful to change between sitting and standing as lot of times as you desire throughout the day.
This desk is durable. It can hold up to 335 lbs even while in operation, so if you have a hefty desktop (or wish to rest on it for some reason) it has you covered. It will also evenly distribute weight no matter how out of balance the weight you place on it is, it will not wiggle or wobble.
because video is pretty kitted out as the desk we’re looking at today is quite standard I attempted to get as near that as I could on uplifts website with comparable configurations the flexi area desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift design is really 5 inches longer but you can do a lot with five inches boom yes now for transparency flexi spot did send this desk out for evaluation however as you should understand by now doesn’t affect my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping up until the end of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can perhaps get doing not have even any cable television grommets for travel through the outside container
for the desktop was not harmed in any way which is entirely bizarre because I might shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply incredibly rough male if I had actually purchased this I ‘d have been on the phone with client service immediately they did likewise handled to miss drilling the pilot holes where you can attach the control box to the desktop a lot of having to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really quite uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each component to support motorized function strangely absolutely where any kind of cable television management materials whatsoever the frame on this unit is a single motor double phase style versus the double motor three-stage design that comes requirement with the uplift desk this can be updated as well to both the double phase double motor and a three-stage dual motor which pushes the cost of the desk up
an extra 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to just over forty seven point six inches so a max I ‘d it is more than tall adequate even for me and I remain at 6 foot for this model does come basic with the control panel that permits up-and-down movement plus three memory spots with an LED readout to inform you the desk height the single motor design utilizes this drive shaft assembly which needs to be changed as the width of the desk is changed the motor operation itself while it might be slow is extremely peaceful as in barely audible this outside a cost would be the one advantage I would provide this unit over the uplift desk and I want to beware here due to the fact that this isn’t a hit piece this desk is 240 dollars cheaper than the equivalent uplift design over 35% less expensive even if you update this flexi spot test to the dual motor three-stage design it still can be found in a hundred and seventy dollars more affordable than the uplift but more affordable doesn’t suggest low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll certainly provide it that however the lateral stability of this desk the horizontal movement at this rate point it’s unacceptable it’s rub salt in the wound here they include a little safety baffle this little steel piece that mounts to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft strikes this baffle and the noise is absolutely shocking to leading things off I chose to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters arrived damaged too my plan for this desk at this moment is to lose the desk top and included all together and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops as much as 63 inches broad and 31 and a half inches deep so this will roll around the studio make it much easier to movie items without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is a financial investment in quality workplace furniture that will last you this at best feels like a less expensive replica of that it just doesn’t feel quality and the difference between this desk and my main desk is night and day do feel free to take a look at their website too which also feels strangely comparable to one of their competitors there’s a wealth of devices you can get for the flexi area desk approximately and consisting of a foot massager and even a stationary stationary bicycle and I might invest another 10 minutes of our valuable time covering different options and accessories I might but I think I’m better that they just sent a basic desk since as a standard desk I’m not a fan of the quality control at this cost point and I don’t think slapping on a lot of extras is the relocation when the core item isn’t what it need to be they do offer a 30-day trial if you’re simply morbidly curious and they service warranty their desks for three years really desk is five years and uplift desk is seven years if you are Review Flexispot Standing Desk
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in regards to video gaming and performance however I would spend the additional money it’s gon na take to enter into a higher end manufacturer like uplift desk or very desk and I have not personally used extremely desk products so I can’t speak on it however their reputation is excellent huge thanks to flexi spot for sending this out for evaluation regrettably I can not advise this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had a problem with seeing as how both the desktop and the casters got here damaged but from a customer perspective you ‘d most likely be truly excited to get this in