today we’re having a look at a motorized sit-stand desk…Sit Stand Workstation Flexispot… you might have seen my review on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was extremely favorable.
It’s really easy to assemble, and it took my 11-year-old daughter and I (I mostly just monitored) under an hour from start to finish.
It’s extremely durable and can hold a great deal of weight. Examine out the video below of it running while there’s an individual lying down on it if you don’t believe me.
The electric raise/lower function is not just easy to use and fast, however it’s also surprisingly smooth and quiet.
You can set your preferred standing and sitting heights, and it will remember them, making it easy to switch in between the two without giving it much thought.
On top of being functional, it likewise looks fantastic in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can suit smaller sized spaces.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may want to add a monitor stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is likewise handy if your furry coworker likes to chew on or have fun with your cable televisions.
Flexispot has choices that are much more economical than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a few functions that I wasn’t always a big fan of:
The bundle that the desk came in was heavy, so bringing it inside was a group effort, however this is just an effect of how sturdy the Flexispot is.
The practical cable tray was a bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the instructions.
You will need to buy an anti-fatigue mat to stay comfortable, however this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both excited (because this meant it was going to be strong) and also a little hesitant (since we all understand how much of a difficulty putting together furniture can be).
Luckily, with the help of an instructional YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I discovered wasn’t discussed well in the instructions.
Is it worth getting a standing desk?
Once assembled, I like the smooth appearance of this desk. I’m positive any of the many varied surfaces that it is available in would look great in any workplace, and the adjustable width makes it easy to fit it in even the smallest of home offices.
The quiet operation and height memory settings make it easy, effective, and peaceful to switch between sitting and standing as sometimes as you want throughout the day.
This desk is tough. It can hold up to 335 pounds even while in operation, so if you have a substantial home computer (or want to rest on it for some reason) it has you covered. It will also evenly distribute weight no matter how unbalanced the weight you put on it is, it will not wobble or wiggle.
in that video is quite kitted out as the desk we’re looking at today is quite standard I tried to get as near to that as I might on uplifts site with comparable setups the flexi spot desk we’re taking a look at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift design is actually 5 inches longer however you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for evaluation but as you should understand by now doesn’t affect my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering up until completion of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can possibly get lacking even any cable grommets for go through the outside container
for the desktop was not damaged in any way which is utterly bizarre due to the fact that I might shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted just extremely rough guy if I had bought this I ‘d have been on the phone with customer service instantly they did likewise managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually quite simple the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each component to support motorized function unusually definitely where any sort of cable management products whatsoever the frame on this unit is a single motor dual stage style versus the dual motor three-stage style that comes requirement with the uplift desk this can be upgraded too to both the dual phase dual motor and a three-stage dual motor which pushes the cost of the desk up
an extra 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from just under 28 inches to simply over forty 7 point 6 inches so a max I ‘d it is more than tall adequate even for me and I remain at 6 foot for this design does come basic with the control panel that enables up-and-down motion plus 3 memory spots with an LED readout to tell you the desk height the single motor design utilizes this drive shaft assembly which has to be changed as the width of the desk is changed the motor operation itself while it might be slow is really peaceful as in barely audible this outside a price would be the one benefit I would give this system over the uplift desk and I wish to take care here since this isn’t a hit piece this desk is 240 dollars less expensive than the comparable uplift design over 35% cheaper even if you update this flexi spot test to the double motor three-stage design it still comes in a hundred and seventy dollars less expensive than the uplift however cheaper doesn’t suggest inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll definitely provide it that however the lateral stability of this desk the horizontal motion at this cost point it’s undesirable it’s add insult to injury here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the noise and this baffle is absolutely frustrating to top things off I decided to include rolling casters to this desk this was a $30 upgrade and two of those 4 casters arrived damaged as well my prepare for this desk at this point is to lose the desk top and included completely and replace it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops up to 63 inches wide and 31 and a half inches deep so this will roll around the studio make it easier to movie products without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is a financial investment in quality workplace furnishings that will last you this at finest seems like a more affordable replica of that it simply doesn’t feel quality and the difference between this desk and my main desk is night and day do feel free to take a look at their site as well which likewise feels eerily comparable to among their competitors there’s a wealth of devices you can get for the flexi spot desk as much as and including a foot massager and even a fixed stationary bicycle and I might invest another 10 minutes of our precious time covering different alternatives and devices I might but I think I’m better that they just sent a standard desk since as a basic desk I’m not a fan of the quality assurance at this rate point and I don’t believe slapping on a bunch of bonus is the relocation when the core product isn’t what it must be they do provide a 30-day trial if you’re simply morbidly curious and they service warranty their desks for 3 years extremely desk is 5 years and uplift desk is 7 years if you are Sit Stand Workstation Flexispot
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in regards to video gaming and productivity however I would spend the additional money it’s gon na require to enter into a greater end producer like uplift desk or really desk and I have not personally utilized extremely desk items so I can’t speak on it however their track record is great huge thanks to flexi area for sending this out for evaluation sadly I can not advise this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a problem with seeing as how both the desktop and the casters arrived damaged however from a client perspective you ‘d probably be truly excited to get this in