today we’re taking a look at a motorized sit-stand desk…Staples Flexispot… you might have seen my evaluation on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are lots of things to like about the Flexispot E7. In general, my experience was extremely positive.
It’s extremely simple to assemble, and it took my 11-year-old child and I (I primarily just supervised) under an hour from start to finish.
It’s very sturdy and can hold a great deal of weight. Inspect out the video below of it operating while there’s a person lying down on it if you don’t believe me.
The electric raise/lower function is not only easy to use and quickly, however it’s likewise surprisingly smooth and peaceful.
You can program your favored standing and sitting heights, and it will remember them, making it simple to change in between the two without offering it much thought.
On top of being practical, it also looks great in my workplace (I got the bamboo top desk).
The width is also adjustable so it can suit smaller areas.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a display stand to your workstation).
The cable tray keeps all of those charging cables organized, which is also handy if your furry colleague likes to chew on or have fun with your cables.
Flexispot has options that are much more budget friendly than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a couple of functions that I wasn’t necessarily a big fan of:
The package that the desk came in was heavy, so bringing it inside was a group effort, however this is just an effect of how sturdy the Flexispot is.
The convenient cable tray was a bit complicated to install. In the end, you eventually slip it under screws, which wasn’t extremely clear from the directions.
You will require to purchase an anti-fatigue mat to remain comfortable, but this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both thrilled (considering that this suggested it was going to be durable) and likewise a little hesitant (since all of us understand how much of a difficulty putting together furnishings can be).
Fortunately, with the help of a training YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t explained well in the directions.
Is it worth getting a standing desk?
Once assembled, I like the smooth look of this desk. I’m confident any of the many diverse surfaces that it comes in would look fantastic in any workplace, and the adjustable width makes it easy to fit it in even the smallest of home offices.
The quiet operation and height memory settings make it simple, effective, and quiet to change in between sitting and standing as lot of times as you want throughout the day.
This desk is sturdy. It can hold up to 335 lbs even while in operation, so if you have a substantial desktop computer (or wish to take a nap on it for some reason) it has you covered. It will likewise equally distribute weight no matter how out of balance the weight you place on it is, it will not wiggle or wobble.
in that video is pretty kitted out as the desk we’re looking at today is quite standard I tried to get as close to that as I might on uplifts site with similar setups the flexi spot desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is actually 5 inches longer but you can do a lot with five inches boom yes now for transparency flexi spot did send this desk out for evaluation however as you ought to understand by now doesn’t impact my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering up until the end of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can possibly get lacking even any cable grommets for go through the outside carton
for the desktop was not damaged in any way which is utterly bizarre since I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just super rough male if I had bought this I ‘d have been on the phone with client service right away they did also handled to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without unintentionally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually quite uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each part to support motorized function strangely absolutely where any sort of cable television management products whatsoever the frame on this unit is a single motor dual stage design versus the double motor three-stage design that comes requirement with the uplift desk this can be upgraded as well to both the dual stage double motor and a three-stage dual motor which presses the cost of the desk up
an extra 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from simply under 28 inches to simply over forty seven point six inches so a max I ‘d it is more than high adequate even for me and I remain at 6 foot for this model does come standard with the control board that permits up-and-down motion plus 3 memory areas with an LED readout to tell you the desk height the single motor design utilizes this drive shaft assembly which has to be changed as the width of the desk is adjusted the motor operation itself while it might be sluggish is very quiet as in barely audible this outside a price would be the one advantage I would offer this system over the uplift desk and I want to take care here because this isn’t a hit piece this desk is 240 dollars less expensive than the equivalent uplift design over 35% cheaper even if you update this flexi spot test to the dual motor three-stage style it still can be found in a hundred and seventy dollars less expensive than the uplift however less expensive does not indicate inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll definitely offer it that but the lateral stability of this desk the horizontal motion at this cost point it’s inappropriate it’s add fuel to the fire here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a part of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the sound is absolutely infuriating to leading things off I decided to include rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters got here damaged as well my prepare for this desk at this moment is to lose the desk top and came with all together and replace it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to film items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality workplace furnishings that will last you this at finest seems like a more affordable replica of that it simply doesn’t feel quality and the difference between this desk and my primary desk is night and day do do not hesitate to take a look at their site too which also feels strangely comparable to one of their competitors there’s a wealth of accessories you can get for the flexi spot desk approximately and including a foot massager and even a stationary exercise bike and I could invest another 10 minutes of our valuable time covering various options and accessories I might but I believe I’m happier that they only sent a fundamental desk since as a basic desk I’m not a fan of the quality control at this cost point and I don’t think slapping on a bunch of additionals is the move when the core item isn’t what it ought to be they do provide a 30-day trial if you’re just morbidly curious and they service warranty their desks for 3 years very desk is five years and uplift desk is 7 years if you are Staples Flexispot
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in regards to gaming and efficiency however I would spend the additional money it’s gon na require to enter into a higher end maker like uplift desk or very desk and I haven’t personally used very desk items so I can’t speak on it however their track record is great big thanks to flexi spot for sending this out for evaluation unfortunately I can not recommend this unit and for the record I’m a hundred percent sure they would have happily changed the parts that I had an issue with viewing as how both the desktop and the casters got here harmed but from a client standpoint you ‘d most likely be actually delighted to get this in