today we’re taking a look at a motorized sit-stand desk…The Flexispot Desk Bike… you might have seen my review on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are a lot of things to enjoy about the Flexispot E7. In general, my experience was very positive.
It’s extremely easy to assemble, and it took my 11-year-old child and I (I primarily simply supervised) under an hour from start to finish.
It’s super sturdy and can hold a great deal of weight. If you don’t think me, have a look at the video listed below of it running while there’s an individual resting on it.
The electrical raise/lower feature is not just easy to use and quickly, but it’s likewise surprisingly smooth and peaceful.
You can configure your preferred standing and sitting heights, and it will remember them, making it simple to switch in between the two without providing it much idea.
On top of being functional, it likewise looks great in my office (I got the bamboo leading desk).
The width is also adjustable so it can suit smaller sized areas.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a monitor stand to your workstation).
The cable tray keeps all of those charging cords organized, which is likewise practical if your furry colleague likes to chew on or play with your cables.
Flexispot has options that are much more affordable than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few features that I wasn’t always a huge fan of:
The bundle that the desk can be found in was heavy, so bringing it inside was a group effort, however this is just a repercussion of how tough the Flexispot is.
The hassle-free cable television tray was a little bit confusing to install. In the end, you eventually slip it under screws, which wasn’t very clear from the guidelines.
You will need to purchase an anti-fatigue mat to remain comfortable, however this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both thrilled (because this meant it was going to be tough) and also a little reluctant (because we all know just how much of an obstacle assembling furniture can be).
Fortunately, with the help of an instructional YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t explained well in the directions.
Is it worth getting a standing desk?
Once assembled, I love the streamlined appearance of this desk. I’m confident any of the many diverse surfaces that it can be found in would look great in any workplace, and the adjustable width makes it easy to fit it in even the smallest of office.
The quiet operation and height memory settings make it easy, efficient, and peaceful to change between sitting and standing as lot of times as you want throughout the day.
This desk is durable. It can hold up to 335 lbs even while in operation, so if you have a substantial home computer (or wish to take a nap on it for some reason) it has you covered. It will also equally disperse weight no matter how out of balance the weight you place on it is, it will not wobble or wiggle.
in that video is pretty kitted out as the desk we’re looking at today is quite fundamental I tried to get as near to that as I could on uplifts site with similar setups the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift model is really five inches longer however you can do a lot with 5 inches boom yes now for transparency flexi area did send this desk out for evaluation however as you should know by now does not affect my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping until completion of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can potentially get lacking even any cable television grommets for go through the outdoors carton
for the desktop was not harmed in any way which is absolutely bizarre since I could shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted just extremely rough guy if I had purchased this I ‘d have been on the phone with customer service instantly they did likewise handled to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of needing to do that myself without mistakenly drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really pretty straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each part to support motorized function strangely absolutely where any sort of cable management materials whatsoever the frame on this unit is a single motor double stage design versus the dual motor three-stage design that comes requirement with the uplift desk this can be updated as well to both the double phase double motor and a three-stage double motor which presses the cost of the desk up
an additional 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to just over forty seven point six inches so a max I ‘d it is more than tall adequate even for me and I stay at 6 foot for this model does come basic with the control panel that allows for up-and-down motion plus three memory areas with an LED readout to inform you the desk height the single motor style utilizes this drive shaft assembly which has to be changed as the width of the desk is changed the motor operation itself while it might be slow is very peaceful as in barely audible this outside a rate would be the one benefit I would offer this unit over the uplift desk and I want to be careful here since this isn’t a hit piece this desk is 240 dollars more affordable than the similar uplift model over 35% less expensive even if you upgrade this flexi area test to the double motor three-stage design it still can be found in a hundred and seventy dollars more affordable than the uplift however less expensive doesn’t suggest low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll certainly offer it that however the lateral stability of this desk the horizontal motion at this price point it’s inappropriate it’s add insult to injury here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft hits this baffle and the noise is definitely frustrating to leading things off I chose to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters got here harmed as well my prepare for this desk at this moment is to lose the desk top and featured entirely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops up to 63 inches broad and 31 and a half inches deep so this will roll around the studio make it much easier to film items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is an investment in quality office furnishings that will last you this at best seems like a cheaper replica of that it just does not feel quality and the difference in between this desk and my main desk is night and day do do not hesitate to have a look at their site as well which also feels strangely similar to among their rivals there’s a wealth of accessories you can get for the flexi area desk as much as and including a foot massager and even a fixed stationary bicycle and I could spend another 10 minutes of our valuable time covering various options and accessories I could but I believe I’m better that they only sent a fundamental desk due to the fact that as a fundamental desk I’m not a fan of the quality control at this price point and I do not believe slapping on a bunch of bonus is the move when the core product isn’t what it should be they do provide a 30-day trial if you’re just morbidly curious and they service warranty their desks for three years very desk is five years and uplift desk is seven years if you are The Flexispot Desk Bike
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in regards to gaming and efficiency however I would invest the additional money it’s gon na take to get into a higher end manufacturer like uplift desk or very desk and I have not personally utilized very desk products so I can’t speak on it however their credibility is very good big thanks to flexi spot for sending this out for evaluation unfortunately I can not suggest this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had a concern with seeing as how both the desktop and the casters arrived damaged but from a customer viewpoint you ‘d most likely be truly delighted to get this in