today we’re taking a look at a motorized sit-stand desk…Vivo Vs Flexispot… you might have seen my review on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are plenty of things to like about the Flexispot E7. In general, my experience was extremely favorable.
It’s extremely easy to put together, and it took my 11-year-old daughter and I (I primarily just monitored) under an hour from start to finish.
It’s incredibly tough and can hold a lot of weight. If you do not think me, take a look at the video listed below of it operating while there’s an individual resting on it.
The electrical raise/lower feature is not only easy to use and quickly, however it’s likewise surprisingly smooth and quiet.
You can program your favored standing and sitting heights, and it will remember them, making it simple to change between the two without providing it much idea.
On top of being practical, it likewise looks excellent in my office (I got the bamboo top desk).
The width is also adjustable so it can suit smaller spaces.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a display stand to your workstation).
The cable tray keeps all of those charging cords organized, which is likewise useful if your furry colleague likes to chew on or have fun with your cable televisions.
Flexispot has options that are even more affordable than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few features that I wasn’t always a huge fan of:
The package that the desk came in was heavy, so bringing it inside was a group effort, however this is just an effect of how tough the Flexispot is.
The convenient cable television tray was a bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the directions.
You will need to purchase an anti-fatigue mat to stay comfortable, but this is a great concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both fired up (considering that this meant it was going to be strong) and also a little hesitant (due to the fact that all of us understand how much of an obstacle assembling furniture can be).
Thankfully, with the help of a training YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t discussed well in the guidelines.
Is it worth getting a standing desk?
As soon as put together, I like the sleek appearance of this desk. I’m confident any of the many varied surfaces that it can be found in would look great in any office, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it simple, effective, and peaceful to switch in between sitting and standing as often times as you desire throughout the day.
Finally, this desk is strong. It can hold up to 335 lbs even while in operation, so if you have a hefty home computer (or wish to take a nap on it for some reason) it has you covered. It will also uniformly disperse weight no matter how out of balance the weight you put on it is, it won’t wiggle or wobble.
in that video is pretty kitted out as the desk we’re taking a look at today is quite fundamental I attempted to get as near to that as I could on uplifts website with similar configurations the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is really five inches longer however you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for evaluation however as you ought to know by now doesn’t affect my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering up until completion of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can possibly get lacking even any cable grommets for go through the outside container
for the desktop was not damaged in any way which is absolutely strange since I could shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted simply super rough guy if I had purchased this I ‘d have been on the phone with customer support immediately they did likewise managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of having to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually pretty straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cables running to it from each component to support motorized function oddly absolutely where any kind of cable management products whatsoever the frame on this unit is a single motor dual stage design versus the double motor three-stage design that comes standard with the uplift desk this can be updated too to both the double phase double motor and a three-stage dual motor which presses the cost of the desk up
an additional 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than high enough even for me and I remain at 6 foot for this model does come standard with the control panel that allows for up-and-down movement plus three memory areas with an LED readout to tell you the desk height the single motor design utilizes this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be sluggish is really peaceful as in barely audible this outside a cost would be the one advantage I would give this system over the uplift desk and I wish to be careful here because this isn’t a hit piece this desk is 240 dollars cheaper than the similar uplift design over 35% less expensive even if you update this flexi spot test to the double motor three-stage style it still comes in a hundred and seventy dollars cheaper than the uplift but less expensive does not imply cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll definitely provide it that but the lateral stability of this desk the horizontal movement at this cost point it’s unacceptable it’s add fuel to the fire here they include a little safety baffle this little steel piece that mounts to the frame and covers a part of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft strikes this baffle and the noise is definitely frustrating to top things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters arrived harmed too my prepare for this desk at this moment is to lose the desk top and included completely and replace it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops up to 63 inches wide and 31 and a half inches deep so this will roll around the studio make it much easier to movie items without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality office furnishings that will last you this at finest seems like a cheaper replica of that it simply does not feel quality and the distinction between this desk and my primary desk is night and day do feel free to check out their website also which likewise feels eerily comparable to one of their rivals there’s a wealth of accessories you can get for the flexi spot desk up to and including a foot massager and even a stationary stationary bicycle and I might spend another 10 minutes of our valuable time covering numerous alternatives and accessories I might however I think I’m happier that they just sent a fundamental desk due to the fact that as a basic desk I’m not a fan of the quality assurance at this price point and I do not think slapping on a lot of extras is the relocation when the core item isn’t what it need to be they do use a 30-day trial if you’re simply morbidly curious and they warranty their desks for 3 years extremely desk is 5 years and uplift desk is seven years if you are Vivo Vs Flexispot
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in regards to gaming and productivity however I would invest the additional money it’s gon na require to enter into a higher end maker like uplift desk or extremely desk and I haven’t personally used very desk products so I can’t speak on it however their credibility is excellent huge thanks to flexi area for sending this out for review unfortunately I can not advise this system and for the record I’m a hundred percent sure they would have gladly changed the parts that I had an issue with seeing as how both the desktop and the casters got here harmed however from a customer viewpoint you ‘d most likely be really excited to get this in