today we’re taking a look at a motorized sit-stand desk…Youtube Flexispot Desk… you might have seen my evaluation on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are lots of things to like about the Flexispot E7. In general, my experience was very positive.
It’s really simple to assemble, and it took my 11-year-old daughter and I (I mostly just supervised) under an hour from start to finish.
It’s incredibly strong and can hold a lot of weight. If you don’t believe me, check out the video listed below of it running while there’s a person lying down on it.
The electric raise/lower function is not just easy to use and quickly, however it’s also remarkably smooth and peaceful.
You can program your favored standing and sitting heights, and it will remember them, making it simple to change in between the two without offering it much idea.
On top of being practical, it also looks excellent in my office (I got the bamboo top desk).
The width is also adjustable so it can suit smaller spaces.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may want to include a screen stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is also helpful if your furry coworker likes to chew on or play with your cable televisions.
Flexispot has options that are even more affordable than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few features that I wasn’t always a substantial fan of:
The package that the desk can be found in was heavy, so bringing it inside was a group effort, however this is simply a repercussion of how sturdy the Flexispot is.
The practical cable tray was a little bit complicated to set up. In the end, you ultimately slip it under screws, which wasn’t very clear from the directions.
You will need to purchase an anti-fatigue mat to remain comfortable, but this is a great concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both fired up (considering that this meant it was going to be sturdy) and likewise a little reluctant (because we all understand just how much of a difficulty assembling furnishings can be).
The good news is, with the help of a training YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t discussed well in the directions.
Is it worth getting a standing desk?
As soon as put together, I love the sleek look of this desk. I’m confident any of the many diverse surfaces that it can be found in would look great in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it simple, effective, and quiet to switch between sitting and standing as sometimes as you desire throughout the day.
This desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a significant home computer (or want to rest on it for some reason) it has you covered. It will likewise evenly disperse weight no matter how unbalanced the weight you put on it is, it won’t wobble or wiggle.
in that video is quite kitted out as the desk we’re taking a look at today is pretty standard I attempted to get as near to that as I could on uplifts website with comparable configurations the flexi spot desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift design is in fact 5 inches longer but you can do a lot with five inches boom yes now for transparency flexi spot did send this desk out for evaluation however as you need to know by now does not impact my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering till completion of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can perhaps get lacking even any cable television grommets for travel through the outdoors container
for the desktop was not damaged in any way which is utterly unusual due to the fact that I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just very rough guy if I had actually acquired this I ‘d have been on the phone with customer care immediately they did likewise managed to miss drilling the pilot holes where you can attach the control box to the desktop a lot of having to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact pretty straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each part to support motorized function unusually absolutely where any type of cable television management products whatsoever the frame on this system is a single motor double phase style versus the dual motor three-stage design that comes requirement with the uplift desk this can be updated also to both the double phase dual motor and a three-stage dual motor which pushes the cost of the desk up
an additional 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to simply over forty 7 point six inches so a max I ‘d it is more than high adequate even for me and I remain at 6 foot for this design does come basic with the control board that permits up-and-down movement plus three memory spots with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is very peaceful as in barely audible this outside a price would be the one advantage I would offer this system over the uplift desk and I wish to take care here due to the fact that this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift design over 35% less expensive even if you update this flexi area test to the dual motor three-stage style it still is available in a hundred and seventy dollars more affordable than the uplift but cheaper does not indicate inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll absolutely provide it that but the lateral stability of this desk the horizontal motion at this price point it’s inappropriate it’s rub salt in the wound here they include a little security baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the noise and this baffle is definitely infuriating to top things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters arrived harmed as well my prepare for this desk at this moment is to lose the desk top and came with all together and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to film products without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality workplace furnishings that will last you this at finest feels like a more affordable imitation of that it simply doesn’t feel quality and the distinction in between this desk and my primary desk is night and day do feel free to take a look at their website also which likewise feels strangely similar to among their rivals there’s a wealth of accessories you can get for the flexi spot desk approximately and including a foot massager and even a fixed stationary bicycle and I might spend another 10 minutes of our precious time covering different options and devices I might however I believe I’m better that they only sent out a standard desk since as a standard desk I’m not a fan of the quality control at this cost point and I don’t believe slapping on a bunch of bonus is the move when the core item isn’t what it should be they do offer a 30-day trial if you’re just morbidly curious and they guarantee their desks for three years extremely desk is 5 years and uplift desk is seven years if you are Youtube Flexispot Desk
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in regards to gaming and productivity but I would spend the extra money it’s gon na take to get into a greater end producer like uplift desk or extremely desk and I have not personally used really desk products so I can’t speak on it but their track record is great big thanks to flexi spot for sending this out for review unfortunately I can not suggest this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had an issue with seeing as how both the desktop and the casters showed up damaged but from a consumer perspective you ‘d probably be actually excited to get this in