today we’re having a look at a motorized sit-stand desk…Zenox Flexispot Monitor Arm… you may have seen my evaluation on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are a lot of things to like about the Flexispot E7. In general, my experience was very favorable.
It’s extremely simple to assemble, and it took my 11-year-old daughter and I (I primarily simply monitored) under an hour from start to finish.
It’s very strong and can hold a lot of weight. Inspect out the video listed below of it operating while there’s an individual lying down on it if you don’t believe me.
The electric raise/lower feature is not just easy to use and quick, however it’s likewise surprisingly smooth and peaceful.
You can configure your preferred standing and sitting heights, and it will remember them, making it simple to change between the two without providing it much thought.
On top of being functional, it also looks fantastic in my workplace (I got the bamboo top desk).
The width is likewise adjustable so it can suit smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a display stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is likewise practical if your furry coworker likes to chew on or have fun with your cables.
Flexispot has choices that are much more cost effective than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of functions that I wasn’t necessarily a big fan of:
The bundle that the desk can be found in was heavy, so bringing it inside was a group effort, but this is just a repercussion of how strong the Flexispot is.
The hassle-free cable tray was a bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the directions.
You will need to buy an anti-fatigue mat to remain comfortable, but this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both fired up (because this suggested it was going to be durable) and likewise a little reluctant (since we all know just how much of a challenge putting together furnishings can be).
Fortunately, with the help of an instructional YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t explained well in the instructions.
Is it worth getting a standing desk?
When assembled, I like the smooth appearance of this desk. I’m positive any of the many varied finishes that it can be found in would look terrific in any office, and the adjustable width makes it easy to fit it in even the smallest of office.
The quiet operation and height memory settings make it easy, effective, and quiet to switch in between sitting and standing as lot of times as you want throughout the day.
Finally, this desk is strong. It can hold up to 335 lbs even while in operation, so if you have a large desktop (or want to sleep on it for some reason) it has you covered. It will likewise uniformly disperse weight no matter how out of balance the weight you put on it is, it will not wiggle or wobble.
because video is quite kitted out as the desk we’re looking at today is pretty basic I tried to get as near to that as I could on uplifts website with comparable configurations the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift design is actually five inches longer however you can do a lot with 5 inches boom yes now for transparency flexi area did send this desk out for evaluation but as you must know by now does not affect my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping until the end of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can potentially get lacking even any cable television grommets for travel through the outside container
for the desktop was not harmed in any way which is utterly strange since I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply extremely rough man if I had actually bought this I ‘d have been on the phone with customer support instantly they did also handled to miss out on drilling the pilot holes where you can attach the control box to the desktop a lot of having to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really pretty straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cables running to it from each component to support motorized function unusually absolutely where any type of cable television management materials whatsoever the frame on this unit is a single motor double stage design versus the double motor three-stage style that comes requirement with the uplift desk this can be updated too to both the dual stage dual motor and a three-stage double motor which presses the cost of the desk up
an extra 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to simply over forty 7 point six inches so a max I ‘d it is more than tall adequate even for me and I remain at 6 foot for this model does come standard with the control board that enables up-and-down movement plus 3 memory areas with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which has to be changed as the width of the desk is adjusted the motor operation itself while it might be sluggish is very peaceful as in barely audible this outside a rate would be the one benefit I would offer this system over the uplift desk and I want to be careful here since this isn’t a hit piece this desk is 240 dollars more affordable than the similar uplift design over 35% cheaper even if you upgrade this flexi spot test to the double motor three-stage style it still comes in a hundred and seventy dollars cheaper than the uplift however cheaper does not indicate inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll absolutely offer it that however the lateral stability of this desk the horizontal movement at this rate point it’s inappropriate it’s add insult to injury here they include a little security baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the noise and this baffle is definitely shocking to leading things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those four casters showed up damaged also my plan for this desk at this moment is to lose the desk top and featured entirely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it simpler to movie items without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is an investment in quality workplace furniture that will last you this at best seems like a less expensive imitation of that it just doesn’t feel quality and the distinction between this desk and my main desk is night and day do feel free to take a look at their website also which also feels eerily comparable to among their competitors there’s a wealth of devices you can get for the flexi spot desk as much as and consisting of a foot massager and even a stationary stationary bicycle and I might invest another 10 minutes of our valuable time covering different choices and accessories I might but I think I’m happier that they just sent out a basic desk due to the fact that as a basic desk I’m not a fan of the quality assurance at this price point and I don’t think slapping on a lot of bonus is the relocation when the core item isn’t what it need to be they do use a 30-day trial if you’re simply morbidly curious and they service warranty their desks for 3 years very desk is five years and uplift desk is seven years if you are Zenox Flexispot Monitor Arm
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in regards to gaming and efficiency but I would invest the additional money it’s gon na take to get into a higher end maker like uplift desk or very desk and I haven’t personally used very desk items so I can’t speak on it but their credibility is great big thanks to flexi spot for sending this out for review sadly I can not suggest this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a concern with seeing as how both the desktop and the casters arrived harmed however from a customer standpoint you ‘d probably be really excited to get this in